Brand: HTB
Category: Audio/Video Receiver
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for 805DV
Uploaded: Nov. 21, 2025, 9:04 p.m.
Warranty Information
This product is warranted to be free from defects in material and workmanship for 1 year parts and labor.
Connecting Speakers: Follow diagrams to connect front, center, surround, and subwoofer speakers using color-coded wires. Ensure proper connection without shorting or reversing polarity.
Subwoofer Setup: Connect subwoofer with audio cable. Turn power ON. Use Auto Power On/Off. Set Crossover Filter to Off. Initially set volume knob to 11 o'clock.
Speaker Balancing: Use the receiver's remote (SETUP button) to manually adjust individual speaker volumes for optimal sound balance.
Speaker Distance: Measure distance from listening position to each speaker. Input these distances into the receiver via the SETUP menu for proper sound timing.
DVD Player Connection: Connect DVD player to receiver using coaxial digital, audio, or S-Video cables. Program the receiver's remote to control the DVD player.
Troubleshooting and error codes
| DVD player unit | ||
| Symptom | Cause | Remedy |
| Playback does not start when the ►/II key is pressed. | There is no disc in the player. | Load a disc and press the ►/II key. |
| There are no signals recorded on the side of the disc being played. | Turn the disc over and properly place it on the disc tray. | |
| The TV is not turned on. | Turn on the TV. | |
| Playback starts but no image/sound is seen/heard. | The connection cords are not properly connected. | Properly reconnect the connection cords. |
| The picture is slightly disrupted when the image is fast forwarded or fast reversed. | This is not a malfunction. | |
| The audio output cords are not properly connected. | Properly connect the audio cords. | |
| No sound is heard. | The volume control of the TV or amplifier is not adjusted properly. | Set the sound volume to an appropriate level. |
| The player is in a special playback mode. | Press the ►/II key to resume normal playback mode. | |
| The picture does not look good or the picture/sound quality is poor. | A nearby device is generating noise. | Separate this unit as far as possible from the device you think is generating the noise. |
| The disc is dirty. | Refer to the "Disc handling precautions" section and wipe dirt from the disc. | |
| It takes a while for the disc to start playing. | The disc is damaged. | Use a new disc. |
| There is condensation on the optical lens. | Refer to the "Caution on condensation" section and evaporate the condensation. | |
| The tray opens automatically. | The disc is not placed horizontally. | Properly place the disc on the tray. |
| The top and bottom of the screen cannot be seen. | The video format of the disc being played does not match that of the connected TV monitor. | Refer to the "Video formats" section, and use a disc with the appropriate video format for your TV or a TV with the appropriate video format for the disc. |
| The subtitle is not displayed. | The DVD disc being played does not contain the recording of subtitles. | The subtitle cannot be displayed when the DVD disc being played does not contain the recording of subtitles. |
| The subtitle mode is set to off. | Press the SUBTITLE ON/OFF key to switch on the subtitle mode. | |
| The voice (or subtitle) language cannot be changed. | The DVD disc being played does not contain the recording of more than one audio (or subtitle) language. | The voice (or subtitle) language cannot be changed when the DVD disc being played does not contain the recording of more than one voice (or subtitle) language. |
| The viewing angle cannot be changed. | The DVD disc being played does not contain the recording of more than one angle. | The viewing angle cannot be changed when the DVD disc being played does not contain the recording of more than one angle. |