Quick Start Guide for X6781-Z37

Quick Start Guide for X6781-Z37

Brand: HUAWEI

Category: Other

Document Type: Quick Start Guide

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 7:24 p.m.

Warranty Information

Offers a 12-month hardware warranty and a 3-month software media warranty.

Web Client Login

  1. Open your browser and enter the IPC IP address. Ensure your PC is in the same network segment.
  2. Enter 'admin' for the username and set a password if prompted (first login).
  3. Click Login.

Basic IPC Settings

  1. Log in to the web client as admin.
  2. Navigate to Preview > Network/Time for IP and time settings.
  3. Go to Preview > Common for image, video stream, and OSD parameters.
  4. Use Settings > System > Visiable Area > Position Information for magnetic calibration.

Network Settings

  1. Log in to the web client as admin.
  2. Navigate to Settings > Network to configure basic network parameters.
  3. Set parameters according to your network plan.

Troubleshooting and error codes

Q: What can I do if the dome camera cannot perform self-check after being powered on? A: Check whether the power cable is loose. If the power cable is loose, reconnect the power cable.
Q: After you enter the IPC IP address in the address box and press Enter, the Internet Explorer displays "There is a problem with this website's security certificate." Click Continue to this web (not recommended) to continue browsing this website. Then, install the root certificate or upload your own certificate.
Q: When the root certificate is downloaded, the Internet Explorer displayed "There is a problem with this website's security certificate", Click "Continue to this website (not recommended)" to access the login page, the Certificate Error is displayed in the address box. Choose Settings > System > Configuration Management > Certificate Management, upload a valid certificate. After the certificate is uploaded, restart the browser.
Q: What can I do if I forgot the password of the admin user? Hold down the Reset button for at least 3s to restore the camera to factory defaults.
▲ CAUTION/注意 Restoring the factory configuration will result in the loss of the user's account information and some of the configuration information. Please exercise caution.
Q: The message "Heating..." is displayed while the live video can be properly viewed. If the IPC is started in low-temperature environment, the IPC may enter the low-temperature protection mode. In this case, the message "Heating..." will be displayed on the live video. When the temperature of the IPC rises, the message will disappear.
Privacy Policy