Manual for DE 110i H, DE 120 H PACE

Manual for DE 110i H, DE 120 H PACE

Brand: Husqvarna

Category: Dust Extractor

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 6:07 p.m.

Manual Publish Date: 2023-06-01

Warranty Information

Refer to your Husqvarna dealer for warranty information.

Product Description: A battery dust extractor that separates dust particles from the air and collects them in a plastic bag.
Intended Use: For professional operations only, to collect and remove dry material from machines and devices. It is H-classified for dust class H in EN 60335-2-69.
Key Operation Steps:
  • Ensure the work area is clean and well-lit.
  • Use appropriate personal protective equipment.
  • Install the battery and select the correct hose diameter.
  • Start the product using the On/Off button.
  • Perform regular maintenance as per the schedule.
  • Follow safety instructions for assembly, operation, and maintenance.
Maintenance: Includes daily, weekly, and periodic checks of filters, connections, wheels, and battery. The filter purge procedure is crucial for maintaining suction.
Safety: Emphasizes reading the manual, using PPE, avoiding hazardous materials, and following specific safety warnings related to electrical hazards, battery handling, and operation.

Troubleshooting and error codes

Problem Cause Solution
The motor stops immediately after start or does not start. There is no power. Connect the battery to the product.
The motor stops immediately after start or does not start. There is a fault with the battery. Do a check of the battery or replace the battery if necessary. Let an approved service agent repair the product.
The motor stops immediately after start or does not start. The green LED flashes on the battery. Low battery voltage. Charge the battery.
The motor stops immediately after start or does not start. The HEPA filter is damaged or not installed. Replace or install the HEPA filter.
The motor stops immediately after start or does not start. There is a short circuit in the product. Let an approved service agent repair the product.
The motor stops immediately after start or does not start. Too high voltage in power supply. Make sure that correct power supply is used.
The motor stops immediately after start or does not start. Too high ambient temperature. Make sure that the ambient temperature is in specified range when you use the product.
The motor stops immediately after start or does not start. Fan is broken or disconnected. Let an approved service agent repair the product.
Privacy Policy