Brand: Husqvarna
Category: Dust Extractor
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for S-Line
Uploaded: Nov. 21, 2025, 8:23 p.m.
Manual Publish Date: 2017-03-24
Warranty Information
12-month factory warranty, extendable to 36 months with warranty slip.
- Ensure the assembly area is firm and the dust extractor is on a stable surface.
- Connect the dust extractor to a properly grounded outlet.
- Check that the power voltage matches the machine's rating plate.
- For models with automatic start, connect the machine to be used with the dust extractor's electrical outlet.
- Operate the machine using the switch, following the specific instructions for red or black switch types.
- Regularly check and clean filters, and replace bags or the collection system as needed.
- Turn off the machine and unplug it before performing any cleaning, servicing, or filter changes.
Troubleshooting and error codes
| Issue | Cause | Solution |
|---|---|---|
| Motor doesn't start | No power | Plug in machine |
| Cable defective | Replace cable | |
| Switch defective | Replace switch | |
| Motor stops immediately after starting | Soft start defective | Replace soft start |
| Wrong fuse | Connect to correct fuse | |
| Motor runs but there is not suction | Shortcut in cable/machine | Order service |
| Hose not connected | Connect hose | |
| Hose clogged/blocked | Clean hose | |
| No dust collection bag | Fit dust collection system | |
| Motor runs but poor suction | Hole in hose | Replace hose |
| Filter clogged | Clean filter/Replace filter | |
| Dust blown from motor | Loose top cover | Adjust |
| Defective gaskets | Replace affected gaskets | |
| Abnormal noise | Wrongly assembled or damaged filter system | Adjust/Replace filters |
| Order service |