Brand: INDESIT
Category: Dishwasher
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for DFG 15B10
Uploaded: April 20, 2026, 7:49 p.m.
Warranty Information
Refer to the appliance data plate for warranty details.
Using Your Dishwasher
To start your dishwasher, press the ON/OFF button. Load detergent into the "B" compartment, ensuring it's dry. For pre-wash, place detergent directly into the tub. Load dishes into the baskets and close the door securely. Select the desired program using the program selector knob. If available, choose any additional wash options. Press the START/PAUSE button to begin. The wash indicator light will illuminate. At the end of the cycle, the END indicator light will turn on. Press ON/OFF to turn off the machine. Wait a few minutes before unloading to avoid burns. Always unload the bottom basket first.
Adding More Dishes: Press START/PAUSE, open the door carefully (watch for steam), add dishes, and press START/PAUSE again. The cycle will resume after a beep.
Modifying a Program: If you start the wrong program, you can change it if it's very early in the cycle. Turn off the machine with a long press on ON/OFF/Reset, turn it back on, and select the new program and options.
Accidental Interruptions: If the door is opened or power is lost during a cycle, it will pause. It will resume from where it left off when the door is closed or power is restored.
Troubleshooting and error codes
| Anomalies: | Possible Causes / Solution: |
|---|---|
| The dishwasher does not start or respond to commands |
• The water tap is not open. • Turn off the machine with the ON/OFF button, turn it back on after a minute and reprogram. • The plug is not correctly inserted into the socket or try a different socket. • The dishwasher door is not closed properly. |
| The door does not close |
• Check if the baskets are inserted correctly. • The door catch has released: push the door firmly until you hear a "click". |
| The dishwasher does not drain water. |
• The wash program has not finished yet. • The drain hose is kinked (see Installation). • The sink drain is obstructed. • The filter is clogged with food residue. • Check the height of the drain hose. |
| The dishwasher makes noise. |
• Dishes are hitting each other or the spray arms. Reposition dishes correctly and check if the spray arms rotate freely. • Excessive foam: detergent was not dosed correctly or is unsuitable for dishwashers. (see Detergent and dishwasher use) Do not pre-wash dishes by hand. • Regenerating salt is missing. • Water hardness setting is incorrect: increase the values. (see Salt, regenerator and rinse aid). • The salt compartment lid is not closed properly. • Rinse aid has run out or the dosage is insufficient. • Rinse aid dosage is excessive. |
| Dishes and glasses have lime deposits or a white film. |
• A program without drying was selected. • Rinse aid has run out. (see Salt, regenerator and rinse aid). • Rinse aid adjustment is incorrect. • Dishes are made of non-stick or plastic material; water droplets are normal. • Dishes were not positioned correctly. • The spray arms are not rotating freely; they are blocked by dishes. • The wash program is too delicate (see Programs). • Excessive foam: detergent was not dosed correctly or is unsuitable for dishwashers. (see Detergent and dishwasher use) • The rinse aid compartment lid was not closed properly. • The filter is dirty or clogged (see Care and maintenance). • Regenerating salt is missing (see Regenerating salt and rinse aid). • Ensure that the height of the plates is compatible with the basket adjustment. • The spray arm holes are clogged. (see Care and maintenance). |
| Dishes are not very dry. |
• A program without drying was selected. • Rinse aid has run out. (see Salt, regenerator and rinse aid). • Rinse aid adjustment is incorrect. • Dishes are made of non-stick or plastic material; water droplets are normal. • Dishes were not positioned correctly. • The spray arms are not rotating freely; they are blocked by dishes. • The wash program is too delicate (see Programs). • Excessive foam: detergent was not dosed correctly or is unsuitable for dishwashers. (see Detergent and dishwasher use) • The rinse aid compartment lid was not closed properly. • The filter is dirty or clogged (see Care and maintenance). • Regenerating salt is missing (see Regenerating salt and rinse aid). • Ensure that the height of the plates is compatible with the basket adjustment. • The spray arm holes are clogged. (see Care and maintenance). |
| Dishes are not clean. |
• The water tap is not open. • The drain hose is kinked (see Installation). • The sink drain is obstructed. • The filter is clogged with food residue. • Check the height of the drain hose. |
| The dishwasher does not fill with water. |
• There was a water supply interruption or the tap is closed. • The water inlet hose is kinked (see Installation). • The filters are clogged and need cleaning. (see Care and maintenance). • The drain is obstructed and needs cleaning. • After performing checks and cleaning, turn off and on the dishwasher and run a new wash cycle. • If the problem persists, close the water tap, unplug the appliance and contact the technical assistance center. |
| The dishwasher is blocked and the indicator lights are flashing. |
• The water tap is not open. • Turn off the machine with the ON/OFF button, turn it back on after a minute and reprogram. • The plug is not correctly inserted into the socket or try a different socket. • The dishwasher door is not closed properly. • Check if the baskets are inserted correctly. • The door catch has released: push the door firmly until you hear a "click". |