Manual for IWC 71251

Manual for IWC 71251

Brand: INDESIT

Category: Washing Machine

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 7:46 p.m.

Warranty Information

Refer to the guarantee certificate for warranty details.

Instructions for use

Installation

  • Unpack and level the machine.
  • Connect electricity and water supplies.
  • Perform the first wash cycle with detergent and no laundry.

Care and maintenance

  • Turn off water and electricity before maintenance.
  • Clean the washing machine exterior, detergent dispenser, door, and drum.
  • Check the water inlet hose for cracks.

Precautions and tips

  • Designed for domestic use only.
  • Supervise children when using the appliance.
  • Do not touch the machine with wet hands or feet.
  • Do not pull the power cable when unplugging.
  • Do not open the detergent dispenser drawer during operation.
  • Do not touch drained water as it may be hot.
  • Never force the porthole door.
  • Do not attempt to repair the appliance yourself if it breaks down.
  • Keep children away from the appliance while operating.
  • The door can become hot during the wash cycle.
  • Moving the appliance requires two or three people.
  • Ensure the drum is empty before loading laundry.

Description of the washing machine and starting a wash cycle

  • Familiarize yourself with the control panel.
  • Load laundry and close the door.
  • Select the wash cycle, temperature, and spin speed.
  • Add detergent and additives.
  • Select desired functions.
  • Press START/PAUSE to begin the cycle.
  • The END indicator will light up when the cycle is complete.

Wash cycles

  • Refer to the table for available wash cycles, temperatures, spin speeds, and load capacities.

Personalisation

  • Adjust temperature and spin speed using the respective knobs.
  • Select additional functions like Eco Time, Energy Saver, Stain removal, and Delay timer.

Detergents and laundry

  • Use the correct detergent dosage.
  • Separate laundry by fabric type, color, and soil level.
  • Weigh laundry to avoid exceeding load limits.
  • Follow special care instructions for wool, jeans, etc.
  • The load balancing system ensures smooth spinning.

Troubleshooting

  • Consult the table for common problems and their solutions.

Service

  • Contact authorized service for assistance.
  • Have model and serial number ready.

Troubleshooting and error codes

Problem: Possible causes / Solutions:
The washing machine does not switch on. • The appliance is not plugged into the socket fully, or is not making contact.
• There is no power in the house.
The wash cycle does not start. • The washing machine door is not closed properly.
• The ON/OFF button has not been pressed.
• The START/PAUSE button has not been pressed.
• The water tap has not been opened.
• A delayed start has been set (see "Personalisation”).
The washing machine does not take in water (the indicator light for the first wash cycle stage flashes rapidly). • The water inlet hose is not connected to the tap.
• The hose is bent.
• The water tap has not been opened.
• There is no water supply in the house.
• The pressure is too low.
• The START/PAUSE button has not been pressed.
The washing machine continuously takes in and drains water. • The drain hose is not fitted at a height between 65 and 100 cm from the floor (see "Installation”).
• The free end of the hose is under water (see "Installation”).
• The wall drainage system is not fitted with a breather pipe.
If the problem persists even after these checks, turn off the water tap, switch the appliance off and contact the Assistance Service. If the dwelling is on one of the upper floors of a building, there may be problems relating to water drainage, causing the washing machine to fill with water and drain continuously. Special anti-draining valves are available in shops and help to avoid this inconvenience.
The washing machine does not drain or spin. • The wash cycle does not include draining: some wash cycles require the drain phase to be started manually.
• The drain hose is bent (see “Installation”).
• The drainage duct is clogged.
The washing machine vibrates a lot during the spin cycle. • The drum was not unlocked correctly during installation (see "Installation”).
• The washing machine is not level (see "Installation”).
• The washing machine is trapped between cabinets and walls (see "Installation”).
The washing machine leaks. • The water inlet hose is not screwed on properly (see "Installation”).
• The detergent dispenser drawer is blocked (for cleaning instructions, see "Care and maintenance”).
• The drain hose is not fixed properly (see "Installation”).
The "Functions" indicator lights and the "start/pause" indicator light flash, while one of the "phase in progress" indicator lights and the "door locked" indicator light will remain lit in a fixed manner. • Switch off the machine and unplug it, wait for approximately 1 minute and then switch it back on again.
If the problem persists, contact the Technical Assistance Service.
There is too much foam. • The detergent is not suitable for machine washing (it should display the text "for washing machines" or "hand and machine wash", or the like).
• Too much detergent was used.
Privacy Policy