Brand: inspire
Category: Lighting
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for Aruba plus
Uploaded: April 20, 2026, 8:03 p.m.
Manual Publish Date: 2020-01-V01
Warranty Information
5-year warranty for the LED chip only, for domestic use at 8 hours/day.
- Fan Operation: Control fan speed (5 levels) and direction (forward/reverse) using the remote. Features timer functions (2H, 4H, 8H) and ON/OFF for the fan.
- Light Operation: Control the light ON/OFF, dimming, and color temperature (3000K, 4300K, 6500K) via the remote.
- Remote Control: Ensure the remote is paired with the fan for operation. Pairing instructions are provided.
- Safety Precautions: Always disconnect power before cleaning or maintenance. Do not use wet sponges. Ensure safe installation clearances from the floor and walls.
Troubleshooting and error codes
| PROBLEM | PROBABLE CAUSE | SUGGESTED REMEDY |
|---|---|---|
| Fan does not start | The fan is under protection.The fuse or circuit breaker has tripped.The electrical connections to the fan are loose.The speed controller is not in the correct position. | Wait 10 seconds with the fan off, then restart.Check the fuses or circuit breakers.Check the electrical connections.Check the speed controller position. |
| Noisy fan | The top cover is touching the ceiling.The fan blade screws are loose.The fan is not securely attached to the ceiling.Incorrect speed controller. | Lower the ceiling cover to create a 3 mm gap.Tighten all blade screws.Tighten all bracket or suspension plate screws.Change the controller. |
| Mechanical noise | The fan blades are not horizontal relative to the ceiling.The fan blade screws are loose. | Run in for at least 8 hours.Measure ceiling to blade tip distance and check for equal distance for all blades.Ensure all screws are tightened. |
| Fan wobbles | Fan blades are not horizontal relative to the ceiling.Fan blade screws are loose. | Measure ceiling to blade tip distance and check for equal distance for all blades.Ensure all screws are tightened. |