Quick Start Guide for ISP99

Quickstart Guide (English)

Introduction

Thank you for purchasing the Charge Time. At ION, your entertainment is as important to us as it is to you. That's why we design our products with one thing in mind—to make your life more fun and more convenient.

Box Contents

• Charge Time
• Power Adapter
• Micro-USB Cable
• 1/8" (3.5 mm) Stereo Aux Cable
• Quickstart Guide
• Safety & Warranty Manual

Support

For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit ionaudio.com. For additional product support, visit ionaudio.com/support.

Features

Top Panel

• 1. Qi Charging Pad: Place your Qi-compatible device here to wirelessly charge it.
• 2. Alarm Button: Press and hold for 2 seconds to adjust the alarm time.
• 3. Clock Button: Press and hold for 2 seconds to adjust the time.
• 4. Down Button (▼): Tap to briefly display the current alarm time. Press and hold for 2 seconds to turn the alarm on or off.
• 5. Up Button (▲): Press and hold for 2 seconds to change clock format. Tap to toggle between 12/24 Hour format and press and hold to confirm.
• 6. Play/Pause Button: Tap to play, pause, or resume audio. Press and hold to disconnect a Bluetooth device.
• 7. Minus Button (-): Tap to skip to the previous track. Press and hold to decrease volume.
• 8. Plus Button (+): Tap to skip to the next track. Press and hold to increase volume.
• 9. Qi LED: Indicates charging status (solid green: charging, flashing red/green: connection error, off: no device detected).

Front Panel

• 1. Bluetooth LED: Lit solid when a Bluetooth device is connected.
• 2. Alarm LED: Lit solid when an alarm is enabled.
• 3. Display: Shows current time, alarm time, or temperature.
• 4. PM LED: Lit to indicate PM time.
• 5. Microphone: Picks up your voice for calls on a connected device.

Rear Panel

• 1. Power Input: Connect the included power adapter to a power outlet.
• 2. Aux Input: Connect a CD player, MP3 player, or other audio source (1/8" stereo). Note: Only one audio source (Bluetooth, Aux, or USB) can play at a time.
• 3. Temperature Gauge: Measures and displays the current temperature.
• 4. USB Port: Connect a USB flash drive for MP3/WAV playback. Use Play/Pause and Minus/Plus for control.
• 5. USB Charge Port: Connect a device's charge cable. Can charge Qi pad and USB device simultaneously. Note: Music playback may reduce charging speed.

Operation

Using the Qi Charging Pad

Place your Qi-compatible device on the charging area. The Qi LED will turn solid green when charging. If a connection fails, the Qi LED will flash red and green. If no Qi device is detected, the LED will remain off.

Note: Avoid prolonged placement of non-Qi devices, metallic objects, magnetic objects, or credit cards on the pad. Thick cases may interfere with charging. Turn off vibration during charging if your phone shifts. Qi charging may not engage if the device is also connected via USB. Devices may get warm during charging; some phones limit charging to 80% if too warm. Charge in a cool location for optimal times.

Using the Alarm

To set the alarm:

1. Press and hold the Alarm button for 2 seconds. Hours digits flash.
2. Tap Up/Down buttons to set the desired hour.
3. Tap Alarm button to switch to minutes digits.
4. Tap Up/Down buttons to set the desired minutes.
5. Press and hold Alarm button to confirm alarm time.
6. Press and hold Down button to enable the alarm. The Alarm LED will be solid when on.

Tap Down button to briefly display alarm time. Press and hold Down button to enable/disable alarm.

When the alarm is sounding:

• Press and hold Alarm button to turn off (alarm time saved for next day).
• Tap any button except Alarm to snooze (9 minutes).

Adjusting the Display

• Brightness: Press Plus and Minus buttons simultaneously to cycle through low, medium, and high brightness.
• Clock Format: Press and hold Up button for 2 seconds to change format. Tap Up to toggle between 12/24 Hour, press and hold to confirm.
• Temperature: Press Alarm and Clock buttons simultaneously to toggle between Celsius and Fahrenheit.

Connecting a Bluetooth Device

To connect:

1. Turn on your Bluetooth device.
2. Turn on Charge Time.
3. If previously paired, it will reconnect automatically. Otherwise, it enters pairing mode.
4. On your Bluetooth device, find and connect to "Charge Time". Note: If a passcode is required, enter 0000.
5. Bluetooth LED will be solid when paired. If connection fails, press and hold Play/Pause to reset.
6. Start playback from your Bluetooth device.

IMPORTANT: If Aux input or USB Port is connected, Bluetooth pairing is disabled. Disconnect device to re-enter pairing mode.

To disconnect Bluetooth, press and hold Play/Pause button.