Manual for GC-XA2

Manual for GC-XA2

Brand: JVC

Category: Action Camera

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Aug. 10, 2025, 12:33 a.m.

Warranty Information

Warranty information not explicitly stated as a period.

Charging the Battery

  • Load the battery by sliding the port/slot cover latch and opening the cover. Insert the battery correctly, pulling the blue lever.
  • Charge the battery by connecting the USB cable. Select "Adapter" and press SET. The Access LED indicates charging. Charging takes approximately 5 hours (PC) or 2.3 hours (AC adapter). Use only JVC AC adapters. The Access LED turns off when charging is complete.

Inserting an SD Card

  • Insert a separately purchased SD card firmly until locked.
  • To remove, push the card in once and pull it straight.
  • Format new SD cards in the menu screen.

Setting the Clock

  • Turn on the camera by holding the Power button.
  • Navigate through MENU > Setup > More > Time Setting to adjust the year, month, day, hour, and minute.

Recording

  • Turn on the camera. Press Record to start/stop recording.
  • Use buttons for zoom in.
  • To switch to photo mode, press MENU and select "Photo".

Watching or Deleting Videos/Photos

  • Switch to playback mode using the Play button.
  • Select a file using < or > buttons and press SET to play.
  • To delete, select the file, press MENU, select "Yes", and press SET.

Using Wi-Fi

  • Download the "ADIXXION sync." app.
  • Turn on Wi-Fi in the camera's menu. Confirm the camera ID and KEY.
  • Activate Wi-Fi on your device (Android/iOS).
  • Start the app and connect to the camera.

Troubleshooting and error codes

Problem Check
Cannot turn on the camera/ The power turns off suddenly Recharge the battery pack.
Cannot connect to the Wi-Fi/ Wi-Fi connection cuts off Try to connect again in a better reception environment. If you are far from the receiver, there is interference, or if there is a microwave or another wireless device nearby, the communication speed may slow down or the connection may not be established.
The thermometer icon appears. The inside of the camera has become overheated. Turn off the unit and wait for a while until the camera cools down.
"Wrong Adapter" is displayed and power turns off. The power is automatically turned off to protect the electrical circuit if the AC adapter input exceeds 5V. Be sure to use an AC adapter manufactured by JVC (AC-V17LU, sold separately).
The image flickers. Turn the power off, and then turn it on again.
Privacy Policy