Brand: JVC
Category: Audio System
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for CA-DXU10 / CA-DXU8
Uploaded: Nov. 21, 2025, 7:55 p.m.
Manual Publish Date: 2007-01-01
Warranty Information
Manufacturer's warranty is 24 months.
Power On/Off: Press the standby button to turn the system on or off. The STANDBY lamp indicates the system's power status.
Source Selection: Use the source selection buttons (e.g., DISC 1-5, DVD/CD, USB MEMORY, FM/AM/AUX) to choose the desired input.
Volume Adjustment: Use the VOL +/– buttons on the remote or the VOLUME controls on the main unit to adjust the volume level.
Tuning to Stations: For radio, select TUNER FM or TUNER AM, then use the tuning buttons or preset numbers to find stations.
Playback: Insert discs or connect USB devices to play back audio, video, or still picture files. Use playback controls like PLAY, PAUSE, STOP, PREV, NEXT.
Settings: Access menus like Setup, Audio, or Picture to customize various system parameters such as color system, sound modes, and display settings.
Troubleshooting and error codes
| Problem | Possible Cause & Solution |
| General: Adjustments or settings are suddenly canceled | There is a time limit. Repeat procedure again. |
| Operations are disabled | The built-in microprocessor may malfunction due to external electrical interference. Unplug the AC power cord and then plug it back in. |
| Unable to operate from the remote control | Path between remote and sensor is blocked, or batteries are exhausted. |
| No sound is heard | Speaker connections incorrect or loose, or headphones are connected. |
| No picture appears on the screen | Video cord connections incorrect or loose. |
| No picture displayed, blurred, or divided picture | TV does not support progressive video input, or incorrect color system selected. |
| Left/right edges of picture missing | Select "4:3 LB /4:3 MULTI LB" for "MONITOR TYPE". |
| Radio broadcasts hard to hear | Antenna connections incorrect/loose, AM loop antenna too close to System, or FM antenna not properly extended/positioned. |
| Disc does not play | Incorrect Region Code for DVD, or disc inserted upside down. |
| ID3 Tag on MP3 disc not shown | System only shows ID3 Tag Version 1. |
| Groups and files not played back as expected | Playing order depends on the application used to record. |
| AV files not played back | Check "FILE TYPE" setting; reload disc/reconnect USB device. Connect only one USB device at a time. Do not charge devices via USB terminal. Do not disconnect device during playback. |
| Disc sound discontinuous | Disc scratched or dirty. |
| Playback sounds strange | Cancel Vocal Masking or Key adjustment. |
| No subtitle appears | Some discs always display no subtitle initially; press SUB TITLE after starting play. |
| Audio language different from selection | Some discs use original language initially; press AUDIO/MPX after starting play. |
| Disc tray does not open/close | AC power cord not plugged in, Child Lock is active, or Program Play is in use. |
| “CANNOT REC” appears | System cannot perform recording. |
| Impossible to record | Tabs on cassette removed, or holes covered with adhesive tape. Karaoke Scoring is in use. |
| Karaoke function cannot be activated | At least one microphone connected and Mic Mixing activated. |
| Karaoke Scoring cannot be activated | Cannot use during recording, DVD menus, or when Program Play/Random Play is active. |
| Scoring result seems wrong | Playback/singing time too short, microphone sound too low, or singing too quietly. |
| Daily Timer or Recording Timer does not work | System must be turned off (standby) when the on-time comes. |