Brand: JVC
Category: Audio System
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for CA-S200
Uploaded: Nov. 21, 2025, 7:10 p.m.
Warranty Information
No warranty information is available in this manual.
Great Sound
- Pre-programmed live surround effects (D.CLUB, HALL, STADIUM) and SEA effects (ROCK, POPS, CLASSIC).
- SEA effects adjust frequency range for boosted lows/highs, richer vocals, or wide/dynamic sound.
Easy Operation
- COMPUPLAY: One-touch operation to turn on and start radio, tape, or CD player.
- Large, clear display with function indicators and messages like "NO DISC", "NO TAPE".
- Four timers: REC, DAILY, SLEEP, and AUTO POWER OFF for unattended recording, waking up to music, falling asleep, and automatic shut-off.
- Auto Edit: Automatically arranges CD tracks onto tape, preventing cut-offs.
Important Cautions
- Installation: Level, dry, moderate temperature location, away from TV and vibrations.
- Power Cord: Do not handle with wet hands; unplug by the plug, not the cord.
- Malfunctions: No user-serviceable parts; unplug and consult dealer. Do not insert metallic objects.
- Batteries: Match polarity; replace when range decreases; remove if not used for long periods; replace both at once; do not mix old/new or different types.
Troubleshooting and error codes
| SYMPTOM | POSSIBLE CAUSE | ACTION |
|---|---|---|
| No sound is heard. | Connections are incorrect, or loose. | Check all connections and make corrections. (See pages 5 and 6.) |
| Impossible to record. | Cassette record protect tabs are removed. | Cover holes on back edge of cassette with tape. |
| Hard to listen to broadcasts because of noise. | The antenna is disconnected. | Re-connect the antenna securely. |
| The loop antenna is too close to the system. | Change the position and direction of the loop antenna. | |
| The feeder/wire antenna is not properly extended and positioned. | Extend feeder/wire antenna at the best reception position. | |
| The CD sound is discontinuous. | The CD is scratched or dirty. | Clean or replace the CD. |
| Unable to operate the Remote. | The path between the Remote and the sensor on the Unit is blocked. | Remove the obstruction. |
| The batteries are discharged. | Replace the batteries. | |
| The CD tray cannot be operated. | The main AC power cord is not plugged in. | Plug in the AC power plug. |
| The CD does not play. | The CD is upside down. | Put the CD in with the label side up. |
| Operations are disabled. | The built-in microprocessor may malfunction due to external electrical interference. | Unplug the system then plug it back in. |
| The cassette carrier cannot be opened. | During tape playing, the power cord is unplugged. | Plug in the power cord and press eject. |