Brand: JVC
Category: Audio System
Document Type: Manual
Language: EN
Available Languages: EN , ES
Uploaded: Nov. 21, 2025, 6:48 p.m.
This limited warranty covers defective materials and workmanship for 1 year from the date of original purchase.
Press the power button to turn the system on. The STANDBY lamp will turn off. To turn off, press the power button again; the STANDBY lamp will light red.
Press source buttons (DVD/CD, USB MEMORY, TAPE A, TAPE B, FM/AM/AUX) to select the desired source. Playback may start automatically.
Use the VOLUME +/- buttons on the remote or the main unit to adjust the sound level.
Select FM or AM/AUX. Use tuning buttons to find stations. Use preset buttons to store and recall stations.
Insert a disc or connect a USB device. Use playback controls (play, pause, stop, skip) to navigate content.
| Problem | Possible Cause | Solution |
|---|---|---|
| Adjustments or settings are suddenly canceled | Time limit | Repeat procedure again. |
| Operations are disabled | Microprocessor malfunction due to external interference | Unplug and replug the AC power cord. |
| Unable to operate from remote control | Obstruction between remote and sensor; Batteries exhausted | Remove obstruction; Replace batteries. |
| No sound is heard | Speaker connections incorrect/loose; Headphones connected | Check speaker connections; Disconnect headphones. |
| No picture appears on screen | Video cord connections incorrect/loose | Check video cord connections. |
| Disc does not play | Wrong Region Code; Disc upside down | Insert disc with correct Region Code; Place disc label-side up. |
| Disc sound is discontinuous | Disc is scratched or dirty | Clean the disc. |
| Playback sounds strange | Vocal Masking or Key adjustment activated | Cancel Vocal Masking or Key adjustment. |
| No subtitle appears | Disc programmed to always display no subtitle | Press SUB TITLE after starting play. |
| Audio language is different | Disc programmed to always use original language | Press AUDIO/MPX after starting play. |
| Disc tray does not open/close | AC power cord not plugged in; Child Lock is on; Program Play is in use | Plug in AC power cord; Cancel Child Lock or Program Play. |