Brand: JVC
Category: Audio System
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for HA-SBT5-E
Uploaded: Nov. 21, 2025, 9:02 p.m.
Warranty Information
This product comes with a 12-month limited warranty.
Basic Operation
- Power On/Off: Press and hold the power button for 2 seconds.
- Bluetooth Pairing: Turn on the headphones, then press and hold the power button until the indicator flashes blue and red. Select "HA-SBT5" on your device.
- Volume Control: Use the volume up/down buttons.
- Play/Pause/Call: Press the power button once.
- Skip Track: Press and hold the volume up/down button.
- Charging: Connect the supplied USB charging cable to the headphones and a USB power source. The indicator turns red while charging and turns off when fully charged.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound | Headphones not turned on. | Turn on the headphones. |
| Volume too low. | Increase the volume. | |
| Bluetooth connection not established. | Pair the headphones again. | |
| Poor sound quality | Bluetooth signal interference. | Move the source device closer, or remove obstacles. |
| Cannot pair | Headphones not in pairing mode. | Ensure the indicator flashes blue and red. |
| Bluetooth on the source device is off. | Turn on Bluetooth on the source device. | |
| Battery not charging | USB cable not connected properly. | Ensure the USB cable is securely connected. |
| USB power source issue. | Try a different USB port or power adapter. |