Brand: JVC
Category: Audio System
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for HA-W500RF (EG)
Uploaded: Nov. 21, 2025, 7:41 p.m.
Warranty Information
Refer to the dealer for information regarding replacement rechargeable Ni-Cd batteries. Please consult your dealer for replacement.
Installation
Select a level, dry, and temperature-appropriate location (0-35°C/32-95°F), away from direct sunlight and heaters.
Power Cord
Handle with dry hands and avoid sharp bends.
Malfunctions
No user-serviceable parts inside. Unplug and consult dealer if issues arise. Do not insert metallic objects or allow water inside.
Features
- FM stereo modulation system.
- Up to 100m reception range.
- Rechargeable Ni-Cd batteries.
- 40mm drivers for high-quality sound.
- Automatic Power On/Off transmitter.
- Adjustable volume for both channels.
Connections
Connect to AV equipment via HEADPHONES jack or LINE OUT/REC OUT terminals.
Power Supply
Use only the provided AC adaptor.
Range of Use
Max 100m in ideal conditions, reduced by building structure and metal furniture.
Charging
Charge headphones with the power switch OFF. Charging takes approx. 24 hours. Battery life is approx. 20 hours.
Usage Tips
- Avoid excessive volume to protect hearing.
- Do not use while cycling, motorcycling, or driving.
- Charge within 10-35°C (50-95°F).
- Charge fully exhausted batteries for optimal efficiency.
Troubleshooting and error codes
| Symptoms | Cause | Remedy |
|---|---|---|
| No sound. | Is the transmitter's power OFF? | Check the connection of the transmitter. |
| Is the headphones' power OFF? | Turn the power on the connected AV equipment ON and start playing. | |
| Is the battery in the headphones exhausted? | Fully charge the headphones. | |
| No sound from the R-channel. | Is the volume of the headphones set to the minimum level? | Adjust the volume of the headphones to the appropriate level. |
| Is the volume of the connected AV equipment set to the minimum level? | Raise the volume level of the connected AV equipment as high as possible without causing distortion. | |
| Is the transmitter connected to equipment with monaural audio output? | Connect them with an optional plug adaptor. (Converts monaural audio output to stereo audio output.) | |
| Distorted sound. | Is the battery in the headphones exhausted? | Fully charge the headphones. |
| Is the volume of the connected AV equipment set too high? | Adjust the volume level of the connected AV equipment as high as possible without causing distortion. | |
| Noisy sound. | Is the battery in the headphones exhausted? | Fully charge the headphones. |
| Are the frequency modulation signals being received correctly? | Turn the TUNING controls on the headphones or select the CHANNEL on the transmitter to adjust them. | |
| Is the volume of the connected AV equipment set too low? | Adjust the volume level of the connected AV equipment as high as possible without causing distortion. | |
| Are the headphones too far away from the transmitter? | Use them within the range the frequency modulation signal can reach. (Refer to page 10.) | |
| Battery charging is impossible. | Has the rechargeable Ni-Cd battery expired? | Replace it with a new Ni-Cd battery. Please consult your dealer for replacement. |