Manual for KD-AR260/KD-G210

Brand: JVC

Category: Audio System

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 7:34 p.m.

Warranty Information

No explicit warranty period or summary is available in the provided pages. Refer to the product packaging or JVC support for details.

Basic Operations

Turning on the power: Press the button. Note that selecting a source automatically turns the unit on.

Selecting the source: Press FM/AM or CD to choose between tuner and CD playback.

Adjusting the volume: Use the SEL button and the control dial. To temporarily drop volume, press /ATT briefly.

Turning off the power: Press and hold /ATT for over one second.

Canceling Display Demonstration

Press and hold SEL for over 2 seconds, then select "DEMO OFF".

Setting the Clock

Press and hold SEL for over 2 seconds, select "CLOCK H" or "CLOCK M", and adjust using the control dial.

Radio Operations

Auto Search: Select band (FM1-3, AM), then press Seek Up or Seek Down to find stations.

Manual Search: Select band, press and hold Seek Up or Down until "M" flashes, then tune manually.

Storing Stations: Use SSM for automatic FM preset or manual preset for FM/AM stations.

Troubleshooting and error codes

Symptoms	Causes	Remedies
Sound cannot be heard from the speakers.	The volume level is set to the minimum level.	Adjust it to the optimum level.
	Connections are incorrect.	Check the cords and connections.
This unit does not work at all.	The built-in microcomputer may have functioned incorrectly due to noise, etc.	While holding SEL (select), press /ATT (standby/on attenuator) for more than 2 seconds to reset the unit. (Your preset adjustments will also be erased.) (See page 2.)
SSM (Strong-station Sequential Memory) automatic preset does not work.	Signals are too weak.	Store stations manually.
Static noise while listening to the radio.	The antenna is not connected firmly.	Connect the antenna firmly.
CD automatically ejects.	CD is inserted upside down.	Insert the CD correctly.
CD-R/CD-RW cannot be played back.	CD-R/CD-RW is not finalized.	• Insert a finalized CD-R/CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording.
Tracks on the CD-R/CD-RW cannot be skipped.	CD is locked.	Unlock the CD. (See page 16.)
CD can be neither played back nor ejected.	The CD player may have functioned incorrectly.	While holding /ATT (standby/on attenuator), press ▲ (eject) for more than 2 seconds. Be careful not to drop the CD when it is ejected.
CD sound is sometimes interrupted.	You are driving on rough roads.	Stop playback while driving on rough roads.
	CD is scratched.	Change the CD.
	Connections are incorrect.	Check the cords and connections.
“NO DISC” appears on the display.	No CD in the loading slot.	Insert a CD into the loading slot.
	CD is inserted incorrectly.	Insert the CD correctly.