Manual for KW-M595BT KW-M590BT

Manual for KW-M595BT KW-M590BT

Brand: JVC

Category: Audio System

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 7:57 p.m.

Warranty Information

Warranty information is not explicitly stated in the provided manual excerpts.

Basic Operations

Turning on the Unit

  1. Press the  Power Button.
  2. The unit is turned on.

To turn off the unit:

  1. Press and hold the  Power Button.

Adjusting the volume

To adjust the volume (0 to 40), Press + to increase, and press - to decrease. Holding + increases the volume continuously to level 15.

Touch screen operations

To perform operations on the screen, you need to touch, touch and hold, flick or swipe to select an item, display setting menu screen or to change the page, etc.

  • Touch: Touch the screen gently to select an item on the screen.
  • Touch and hold: Touch the screen and keep your finger in place until the display changes or a message is displayed.
  • Flick: Slide your finger quickly to the left or right on the screen to change the page. You can scroll the list screen by flicking the screen up/down.
  • Swipe: Slide your finger up or down on the screen to scroll the screen.

Display the HOME screen

  1. Press the  Home Button.
  2. HOME screen appears.

Troubleshooting and error codes

Troubleshooting

Problems and Solutions

CategoryProblemSolution
About settingsCannot set up the subwoofer.Set the subwoofer to on. See Speaker/X'over setup (P.47).
Cannot set up subwoofer phase.Set the subwoofer to on. See Speaker/X'over setup (P.47).
No output from the subwoofer.Set the subwoofer to on. See Speaker/X'over setup (P.47).
Cannot set up the low pass filter.Set the subwoofer to on. See Speaker/X'over setup (P.47).
Cannot set up the high pass filter.Set the subwoofer to on. See Speaker/X'over setup (P.47).
About audio operationsRadio reception is poor.Pull out the antenna all the way. Connect the antenna control wire correctly. See Connecting wires to terminals (P.57).
Cannot select a folder.Turn off the random play function.
The sound skips when an audio file is being played.The recording condition is bad. Record the file again or use another USB memory.
OtherThe Touch Sensor Tone doesn't sound.The preout jack is being used. The Touch Sensor Tone cannot be output from the preout jack.

Error Messages

MessageExplanationSolution
No Device (USB device)The USB device is selected as a source although no USB device is connected.Change the source to any source other than USB. Connect a USB device, and change the source to USB again.
Disconnected (Bluetooth audio player)The Bluetooth audio player is selected as a source although no Bluetooth audio player is connected.Change the source to any source other than Bluetooth. Connect an Bluetooth audio player, and change the source to Bluetooth again.
No Media fileThe connected USB device contains no playable audio file.See Playable Media and Files (P.62) and try another USB device.

SiriusXM (KW-M595BT only)

MessageExplanationSolution
Check TunerA SiriusXM tuner is not connected to this unit.Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio.
Subscription Updated - Press Return To ContinueThe SiriusXM subscription has been renewed.Touching [Return] on the popup screen will clear the message.
Channel *** Not AvailableThe currently selected channel is unavailable.Visit www.siriusxm.com for more information about the SiriusXM channel lineup.
Channel *** Not Subscribed / Call SiriusXM to SubscribeThe currently selected channel is not subscribed to.In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349. In Canada, visit www.siriusxm.ca or call 1-877-438-9677.
Check AntennaNo antenna is connected to the SiriusXM tuner.Check that an antenna is connected to the SiriusXM tuner. Check antenna for damages.
No SignalNo SiriusXM radio signal is received.Verify that your vehicle is outdoors with a clear view of the sky.
Channel *** Locked / Please Enter the Lock CodeThe selected channel has been locked by the parental controls.Enter the unlock code when you are asked. See Parental Control (P.28).
Incorrect Pass Code enteredThe selected channel is a mature or parental lock channel, and locked by the parental lock or user lock code.Enter the correct lock code.
Privacy Policy