Brand: JVC
Category: Audio System
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for UX-G500V
Uploaded: Nov. 21, 2025, 7:44 p.m.
Manual Publish Date: 2008-05-01
Warranty Information
No specific warranty period is mentioned in the provided pages.
Basic Operation
To turn on the System: Press the � button on the remote or main unit. The STANDBY lamp turns off.
To select the source: Press the appropriate source button (DVD/CD, USB, TUNER, AUDIO IN) on the remote control or the main unit. Playback may start automatically.
To adjust the volume: Use the VOL + / - buttons on the remote or the VOLUME dial on the main unit.
To turn off the System (standby): Press the � button on the remote control. The STANDBY lamp lights red.
For private listening: Connect headphones to the PHONES jack. Ensure volume is low before connecting.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Adjustments or settings are suddenly canceled before you finish. | There is a time limit. Repeat procedure again. |
| Operations are disabled. | The built-in microprocessor may malfunction due to external electrical interference. Unplug the power cord and then plug it back in. |
| Unable to operate the System from the remote control. | The path between the remote control and the remote sensor on the System is blocked. The batteries are exhausted. |
| No sound is heard. | Speaker connections are incorrect or loose. Headphones are connected. |
| No picture appears on the TV screen. | The video cord connections are incorrect or loose. |
| No picture is displayed on the TV screen, the picture is blurred, or the picture is divided into two parts. | The System is connected to a TV which does not support progressive video input. Incorrect scanning mode is selected (see page 16). |
| The left and right edges of the picture are missing on the screen. | Select "4:3 LB/4:3 MULTI LB" for "MONITOR TYPE" (see page 36). |