Manual for UX-N1S

Manual for UX-N1S

Brand: JVC

Category: Audio System

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 7:13 p.m.

Warranty Information

Warranty information is not specified in this manual.

  • Basic Operations: Buttons for power, volume, play/pause, stop, skip, and mode selection are located on the system and remote. Use buttons on the remote to control playback, tune into radio stations, and access settings.
  • Radio Tuning: Select FM or AM, then use UP/DOWN buttons to tune to a station or preset buttons to recall stored stations.
  • Disc Playback: Insert a disc into the tray and press PLAY. Use playback controls to navigate tracks. Supports CD and MP3 formats.
  • Portable Audio Device Connection: Connect via LINE IN jack using a stereo mini plug cord. QP Link feature allows easy playback activation.
  • Clock & Timer Settings: Set the clock first, then configure Daily Timer for automatic playback at set times.

Troubleshooting and error codes

Problem Cause/Solution
Power does not come on. Power plug is not inserted securely. Plug in securely.
Adjustments or settings are suddenly canceled before you finish. There is a time limit. Repeat the procedure again.
Operations are disabled. The built-in microprocessor may malfunction due to external electrical interference. Unplug the AC power cord and then plug it back in.
Unable to operate the System from the remote control. The path between the remote control and the remote sensor on the System is blocked.
The batteries are exhausted.
No sound is heard. Speaker connections are incorrect or loose.
Headphones are connected.
Hard to listen to broadcasts because of noise. Antennas connections are incorrect or loose.
The AM loop antenna is too close to the System.
The FM antenna is not properly extended and positioned.
The disc does not play. The disc is placed upside down. Place the disc with the label side up.
MP3 disc is recorded with the "packet writing (UDF file)." It cannot be played.
Check the files you want to play back.
ID3 Tag on an MP3 disc cannot be shown. There are two types of ID3 Tag-Version 1 and Version 2. This System can only show ID3 Tag Version 1.
MP3 groups and tracks are not played back as you expect. The playing order is determined when the disc was recorded. It depends on the writing application.
The disc sound is discontinuous. The disc is scratched or dirty.
The disc tray does not open or close. The AC power cord is not plugged in.
Daily Timer does not work. The System has been turned on when the on-time comes. Timer starts working only when the System is turned off.
Privacy Policy