Brand: JVC
Category: Audio System
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for UX-T151/T150
Uploaded: Nov. 21, 2025, 7:59 p.m.
Warranty Information
Refer to your nearest dealer for any damage, disconnection, or contact failure.
Powering On/Off: Press the /I button. The STANDBY indicator goes out when powered on, and lights up when powered off. Even when off, a small current flows for the remote control and timer.
CD Playback: Press /I to power on and select CD mode. Load CD, close holder, press /I to play. Use /I to stop. Use ►■ for temporary pause. Use SEARCH buttons or MULTI JOG dial to find tracks.
Tuner Operation: Press TUNER/BAND to select tuner mode. Tune to desired station using tuning buttons or presets.
Tape Playback: Load cassette, press TAPE button to start playback. Select reverse mode. Use REW/FF buttons for fast winding.
Recording: Use ONE TOUCH REC for synchronized CD to tape recording. Check safety tabs.
Troubleshooting and error codes
| Symptom | Possible Cause | Solution |
|---|---|---|
| Power cannot be turned on. | Is the power cord unplugged? | Check power cord connection. |
| No sound from the speakers. | Are headphones connected? | Disconnect headphones. |
| CD player does not play. | Is the CD upside down? | Insert CD correctly. |
| Is the CD dirty? | Clean the CD. | |
| A certain portion of the CD does not play correctly. | Is the CD scratched? | Use a different CD. |
| Playback sound is at a very low level. | Is the head dirty? | Clean the heads. |
| The ONE TOUCH REC button does not function. | Have the safety tabs of the cassette been broken off? | Refer to the manual. |
| Reception is noisy. | Try adjusting the antenna. | Adjust antenna position. |
| Timer operation does not start. | Is the current time set correctly? | Set the current time. |
| Is the timer mode displayed? | Check timer settings. | |
| Remote control is impossible. | Are the batteries in the remote control exhausted? | Replace batteries. |
| Is the remote sensor section exposed to bright light? | Move the unit or cover the sensor. |