Manual for GR-AX1010

Manual for GR-AX1010

Brand: JVC

Category: Camcorder

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Aug. 10, 2025, 12:35 a.m.

Manual Publish Date: 1996-05-01

Warranty Information

This limited warranty is valid in the 50 United States, DC, and Puerto Rico for parts and labor.

QUICK OPERATION GUIDE

SUPPLY POWER

  • Hook the battery pack's top end to the camcorder and push it in until it locks.
  • To remove, slide the BATT. RELEASE and pull out the pack.

INSERTING A VIDEO CASSETTE

  • Slide EJECT, insert a video cassette, and press PUSH.

PLAYBACK

  • Set power switch to PLAY.
  • Press REW to go to the beginning of the tape.
  • Press PLAY/PAUSE to start playback.
  • Press STOP to stop playback.

SHOOTING

  • Slide the LENS COVER to open it.
  • Set power switch to CAMERA. The power indicator lights.
  • Press RECORDING START/STOP to begin recording. Press again to temporarily stop.

Troubleshooting and error codes

OTHER POSSIBLE CAUSE(S)
The tape won't eject.
The battery pack is running low.
The Shooting Mode selector is set to "FULL AUTO".
Some functions are not available.
The Shooting Mode selector is set to "FULL AUTO".
Vertical white lines appear when shooting a very bright object.
This sometimes occurs when the contrast between the background and the object is great. It is not a defect of the camcorder.
Bright, crystal-shaped spots appear in the viewfinder.
Sunlight is directly entering the lens.
The picture is blurred in the Quick Review or Retake mode.
This is normal while recording in the EP mode. Some noise may be present while recording in the SP mode (pg. 13).
An error number (E03) appears in the viewfinder.
Turn the camcorder's power off, then disconnect the power source. After a few minutes, try turning the power on again. If the error number still appears in the viewfinder, consult your nearest JVC dealer.
The image is out of focus.
The diopter needs to be adjusted (pg. 10).
The scene being shot is adversely affecting the operation of Auto Focus (pg. 24).
Shift Zoom (pg. 17) is in use. Beyond the optical zoom limit, magnification is achieved through digital processing. This will cause the image to look as though it's out of focus.
A character generator title and the date and time displays disappear from the viewfinder.
If you remove the power source from the camcorder while the power is on, all settings and selections are erased. Make sure to turn the camcorder's power off before disconnecting the power source.
Even though the Lens Cover is open, the Lens Cover Warning indicator blinks.
The Lens Cover Warning indicator may blink when the camcorder is used in dark areas, regardless of the position of the Lens Cover.
Privacy Policy