Brand: JVC
Category: Camcorder
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for GR-AX910
Uploaded: Aug. 10, 2025, 12:34 a.m.
Manual Publish Date: 1996-01-01
Warranty Information
This product is warranted for 12 months for parts and 90 days for labor.
Powering On/Off: Hook battery pack onto camcorder and push until it locks. Slide power switch to 'PLAY' or 'CAMERA'. Slide power switch to 'OFF' to turn off.
Loading Cassette: Slide EJECT, insert cassette with label facing outward, press PUSH.
Shooting: Open Lens Cover, set power to 'CAMERA', press RECORDING START/STOP to begin recording. Press again to stop.
Playback: Set power to 'PLAY', press REW to find beginning of tape, press PLAY/PAUSE to start playback. Press STOP to stop.
Troubleshooting and error codes
| SYMPTOM | POSSIBLE CAUSE(S) |
| The tape won't eject. | The battery pack is running low. |
|---|---|
| Some functions are not available. | The Shooting Mode selector is set to "FULL AUTO". |
| Vertical white lines appear when shooting a very bright object. | This sometimes occurs when the contrast between the background and the object is great. It is not a defect of the camcorder. |
| Bright, crystal-shaped spots appear in the viewfinder. | Sunlight is directly entering the lens. |
| The picture is blurred in the Quick Review or Retake mode. | This is normal while recording in the EP mode. Some noise may be present while recording in the SP mode (pg. 13). |
| An error number (E03) appears in the viewfinder. | Turn the camcorder's power off, then disconnect the power source. After a few minutes, try turning the power on again. If the error number still appears in the viewfinder, consult your nearest JVC dealer. |
| The image is out of focus. | The diopter needs to be adjusted (pg. 10). |
| A character generator title and the date and time displays disappear from the viewfinder. | The scene being shot is adversely affecting the operation of Auto Focus (pg. 24). |
| Even though the Lens Cover is open, the Lens Cover Warning indicator blinks. | If you remove the power source from the camcorder while the power is on, all settings and selections are erased. Make sure to turn the camcorder's power off before disconnecting the power source. |