Brand: JVC
Category: Camcorder
Document Type: Manual
Language: EN
Brand: JVC
Category: Camcorder
Document Type: Manual
Language: EN
Uploaded: Nov. 21, 2025, 9:17 p.m.
Manual Publish Date: 2006-01-01
Refer to the dealer or JVC for specific warranty information.
| Problem | Possible Cause | Solution |
| No power is supplied. | Power not connected properly. | Connect the AC Adapter securely. |
| Battery pack not attached firmly. | Detach and re-attach the battery pack firmly. | |
| Battery is dead. | Replace with a fully charged one. | |
| Recording cannot be performed. | Tape's erase protection tab set to "SAVE". | Set to "REC". |
| "TAPE END" appears. | Replace with new cassette. | |
| Cassette holder cover is open. | Close the cassette holder cover. | |
| Vertical lines appear when shooting in bright light. | - | This is not a malfunction. |
| Screen becomes red or black in direct sunlight. | - | This is not a malfunction. |
| Date/time does not appear during recording. | "DATE/TIME" is set to "OFF". | Set "DATE/TIME" to "ON". |
| LCD monitor or viewfinder indications blink. | Effects and "DIS" functions selected together. | Re-read sections covering Effects and "DIS". |
| Digital Zoom does not work. | 32X optical zoom selected. | Set "ZOOM" to "64X" or "900X". |
| VIDEO/MEMORY Switch set to "MEMORY". | Set to "VIDEO". | |
| Tape moving, but no picture during playback. | TV not set to VIDEO mode. | Set TV to appropriate mode or channel. |
| Cassette holder cover is open. | Close the cassette holder cover. | |
| Blocks of noise or blue screen during playback. | Dirty video heads. | Clean with an optional cleaning cassette. |
| Focus does not adjust automatically. | Focus set to Manual mode. | Set Focus to Auto mode. |
| Lens is dirty or covered with condensation. | Clean the lens and check focus. | |
| Snapshot mode cannot be used. | Wide (16:9) mode selected. | Disengage Wide mode. |
| Snapshot image color is strange. | Light source issues or subject composition. | Find a white subject and compose shot to include it. |
| Snapshot image is too dark. | Shooting under backlit conditions. | Press BACKLIGHT. |
| Snapshot image is too bright. | Subject is too bright. | Set to "SPOTLIGHT". |
| White Balance cannot be activated. | Sepia or Monotone mode activated. | Disengage Sepia/Monotone mode before setting White Balance. |
| Image shutter speed looks too slow. | Shooting in dark with "GAIN UP" set to "AUTO". | Set "GAIN UP" to "AGC" or "OFF". |
| POWER/CHARGE lamp not lit during charging. | Extreme temperatures. | Charge between 10°C to 35°C. |
| Battery pack not attached firmly. | Detach and re-attach firmly. | |
| "SET DATE/TIME!" appears. | Date/time not set. | Set the date/time. |
| Built-in clock battery depleted. | Consult nearest JVC dealer for replacement. | |
| Memory card files cannot be deleted. | Files are protected. | Remove protection and delete. |
| Black bar at bottom of printed image. | - | Record with "DIS" de-activated. |
| Camcorder does not operate via DV connector. | DV cable plugged/unplugged with power on. | Turn camcorder power off and on, then operate. |
| Images on LCD monitor dark or whitish. | Low temperature or end of LCD life. | Adjust brightness/angle; consult dealer if needed. |
| Colored bright spots on LCD/viewfinder. | - | Not a malfunction. |
| Cassette will not load properly. | Low battery charge. | Install a fully charged battery. |
| Memory card cannot be removed. | - | Push card a few more times. |
| No picture on LCD monitor. | Viewfinder priority set to FINDER. | Push viewfinder back or set priority to LCD. |
| LCD monitor brightness too dark. | Adjust brightness. | |
| Monitor tilted upward 180 degrees. | Open monitor fully. | |
| Error indication (01-04 or 06) appears. | Malfunction. | Consult nearest JVC dealer. |