Brand: JVC
Category: Camcorder
Document Type: Manual
Language: EN
Brand: JVC
Category: Camcorder
Document Type: Manual
Language: EN
Uploaded: Aug. 10, 2025, 12:34 a.m.
This manual covers the initial setup and operation of your JVC Hard Disk Camcorder. Key sections include:
Refer to specific pages for detailed instructions on each function.
| Troubleshooting | Possible Cause | Solution |
| Camera does not operate. | Battery is not installed or battery is not charged. | Install or charge the battery pack. |
|---|---|---|
| AC adapter is not connected correctly. | Connect the AC adapter correctly. | |
| Power switch is not set correctly. | Set the power switch correctly. | |
| The power/charge lamp does not light. | Battery is not installed correctly. | Install the battery pack correctly. |
| Battery is completely discharged. | Charge the battery pack. | |
| The battery pack is not compatible. | Use a genuine JVC battery pack. | |
| The camera does not record. | Recording medium is full. | Format the recording medium or transfer files to PC. |
| SD card is write-protected. | Slide the write-protection tab to the unlock position. | |
| The SD card is not formatted or corrupted. | Format the SD card using the camera. | |
| The recorded video/still image is corrupted. | SD card is not compatible or faulty. | Use a guaranteed SD card or format the existing card. |
| Camera was dropped during recording. | Use the Drop Detection function or save files to EXTMOV folder. | |
| No sound is recorded. | Volume is set to minimum or muted. | Adjust volume or check mute settings. |
| Microphone is obstructed. | Ensure microphone is not covered. |