Brand: JVC
Category: Camcorder
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for GZ-R445BE
Uploaded: Aug. 10, 2025, 12:33 a.m.
Warranty Information
None
Getting Started:
- Charging the Battery: Open the terminal cover, connect the adapter cable to the AC adapter, plug the AC adapter into an outlet, and connect the other end to the unit's USB socket.
- Inserting an SD Card: Open the terminal cover, close the LCD monitor to turn off the unit, and then insert the SD card.
Recording:
- Ensure the recording mode is video and i.A. (Intelligent Auto) mode.
- Press the START/STOP button to start recording and press again to stop.
- Use the Zoom Lever to zoom in (Telephoto) or out (Wide angle).
Playback:
- Select video or still image mode.
- Tap PLAY to enter playback mode.
- Tap on a file to play it back.
- Use the volume controls on the unit.
- To delete files, tap the delete icon, select files, tap SET, EXECUTE, and OK.
Troubleshooting:
- Refer to the "Troubleshooting" section in the "Detailed User Guide".
- Reset the unit by removing all cables, pressing the reset button inside the terminal cover, and then reattaching the AC adapter.
Troubleshooting and error codes
| Troubleshooting | Description |
|---|---|
| Problems with the unit | Refer to the “Troubleshooting” section in the “Detailed User Guide”. |
| Difficulties operating the unit | Refer to the detailed descriptions in the “Detailed User Guide”. http://manual3.jvckenwood.com/index.html/ |
| Unit not functioning properly (due to electrostatic discharge, external noise, interference) | Reset the unit: ① Remove all cables. ② Press the “Reset button” inside the terminal cover. ③ Reattach AC adapter, open LCD monitor. |
| Problem not solved after resetting | Consult your nearest JVC dealer or JVC service center. |