Brand: JVC
Category: DVD Player
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for XV-M52SL
Uploaded: Nov. 21, 2025, 8:22 p.m.
Warranty Information
Warranty information is not explicitly stated in the provided pages.
- Turning on/off the unit: Press the STANDBY/ON /▲ button to turn the unit on or off.
- Inserting and removing discs: Press the ▲ (Open/Close) button to open/close disc trays. Insert discs into the trays.
- Basic playback: Press PLAY MODE to select playback options. Press the PLAY button to start playback. Press STOP to stop completely, or PAUSE to pause.
- Connections: Connect the unit to a TV using AV cables. Connect to audio equipment for better sound quality. Follow on-screen displays and diagrams for proper connections.
- Remote control: Install batteries in the remote control. Use the remote control to operate the unit and basic TV functions.
Troubleshooting and error codes
| Symptom | Possible case | Remedy |
|---|---|---|
| Power does not come on. | Power plug is not inserted securely. | Plug in securely. |
| Remote control does not work. | Too far from the unit. | Move closer to the unit. |
| The tip of the remote unit is not pointed in the right direction. | Point the infrared light-emitting window toward the remote sensor on the front panel. | |
| Batteries are exhausted. | Replace the batteries with new ones. | |
| No picture is displayed on the monitor. | Connection of video cable is incorrect. | Connect the cable correctly. |
| No picture is displayed on the monitor when using the COMPONENT or S-VIDEO output jack(s). | Jack(s) at use is (are) not active. | Make them active. (See page 17.) |
| The unit is connected to a VCR directly and the copyguard function is activated. | Connect the unit so that the picture signal flows directly to the TV. | |
| Picture is noisy. | Disc is dirty. | Wipe the disc surface. |
| No audio is reproduced. | Input selection of amplifier is incorrect. | Select correctly. |
| Sound is distorted or noise is generated. | Disc is dirty. | Wipe the disc surface. |
| Picture does not fit the television screen. | MONITOR TYPE is not correctly set. | Select monitor type correctly. (See page 55.) |
| Operation is not possible. | Microcomputer malfunction due to lightning or static electricity. | Turn off the power and unplug the power cord, then connect the power cord again. |