Brand: JVC
Category: Projector
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for DLA-RS3000
Uploaded: Nov. 21, 2025, 8:29 p.m.
Warranty Information
Refer to the warranty card for warranty details.
Getting Started
- Safety Precautions
- Accessories/Optional Accessories
- Controls and Features (Front, Bottom, Side, Rear, Input Terminals)
- Remote Control operation
- Menu navigation
Set up
- Installing the Projector (Precautions, Mounting, Position adjustment)
- Connecting the Projector (HDMI, LAN, RS-232C, TRIGGER, Power Cord)
Operate
- Viewing Videos (Turn on power, Choose image, Hide image)
Adjust/Set
- Image Quality adjustments (Picture Mode, Color Profile, HDR, Detail/Sharpness)
- Image Output adjustments (Gamma, Auto Tone Mapping, Motion Control)
- Menu settings
Maintenance
- Replacing the Lamp
- Resetting Lamp Time
- Maintaining Cabinet and Remote Control
- Cleaning and Replacing Filter
Troubleshooting
- Error messages and solutions
Troubleshooting and error codes
| Indicator Status (WARNING, LIGHT, STANDBY/ON) | Blinking | Frequency | Description | Check and Countermeasure |
|---|---|---|---|---|
| (Red) | 0 | x2 | Cooling fan stopped abnormally | Check that nothing is blocking the air inlets. |
| 0 | * | x3 | Internal temperature is abnormally high | Check that the external temperature is normal. |
| 0 | * | x4 | External temperature is too high | Countermeasure: Leave the unit unoperated until it cools down. After that, turn on the power again. |
| (Red) | 0 | x1 | DD board occurs error | |
| 0 | x2 | Motor board occurs error | ||
| 0 | x3 | CPU board occurs error | ||
| (Red) | (Orange) | x4 | Power board occurs error | |
| 0 | x1 | Lamp does not light up and unit is unable to project | • Check that the lamp unit and lamp cover are correctly installed. | |
| 0 | x2 | Lamp goes out during projection | Countermeasure: Turn on the power again. | |
| 0 | x3 | When the lamp cover is removed | ||
| (Green) | 0 | x3 | The remote control code differs between this unit and the remote control | Set the remote control code for this unit and the remote control correctly. (P. 62) |