Brand: JVC
Category: Television
Document Type: Manual
Language: EN
Manual for AV-32X37HKE / AV-28X37HKE
Uploaded: Nov. 21, 2025, 7:43 p.m.
Warranty Information
Warranty information is not explicitly detailed in the provided sections.
Setting up your TV
- Connect aerial and VCR.
- Connect power cord.
- Insert batteries into remote control.
- Follow on-screen instructions for initial settings (language, auto program).
- Configure T-V LINK functions if applicable.
TV buttons and functions
- Turn main power on/off using the button on the TV.
- Turn TV on/off from standby mode using the remote.
- Choose TV channels using buttons or number buttons.
- Adjust volume using dedicated buttons.
Remote control functions
- Use number buttons or arrow buttons to change channels.
- Use specific buttons for functions like ZOOM, 3D CINEMA SOUND, Teletext, etc.
- Operate VCR/DVD player with the VCR/DVD switch set accordingly.
Teletext function
- Basic operation: choose teletext broadcast, set VCR/DVD switch to Text, press Text button.
- List Mode: store and recall favorite pages.
- Hold, Sub-page, Reveal, Size, Index, Cancel functions available.
Using the TV's menu
- Press OK to display main menu.
- Navigate menus using arrow buttons and OK.
- Adjust PICTURE SETTING, PICTURE FEATURES, SOUND SETTING, etc.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Cannot turn on TV | Mains plug disconnected | Connect to mains outlet. |
| Main power button not pressed | Press the main power button. | |
| No picture or no sound | Poor TV channel reception | Check channel, try changing BLUE BACK function to OFF. |
| Headphones connected | Disconnect headphones; TV speakers will turn on. | |
| Poor picture | Aerial or aerial cable issue | Check connections, cable damage, aerial direction, or aerial fault. |
| Interference from other equipment | Move interfering equipment away from TV or move the TV. | |
| Interference from signals (ghosting) | Change aerial direction or use a better directional aerial. | |
| Incorrect COLOUR SYSTEM settings | Adjust COLOUR SYSTEM settings. | |
| COLOUR and BRIGHT settings not adjusted | Adjust COLOUR and BRIGHT settings. | |
| Videotaping teletext | Not recommended; may not record correctly. | |
| Bright image display | White parts may appear coloured (normal for picture tube). | |
| Distorted image from video software/tapes | Condition of the video signal is the cause. | |
| Poor sound | BASS or TREBLE not adjusted | Adjust sound settings. |
| Poor TV channel reception (stereo/bilingual) | Change to mono sound. | |
| TV does not respond to remote | Remote control batteries worn out | Replace batteries. |
| Incorrect remote control usage | Use in front of TV, within 7 metres. | |
| Viewing teletext | Return to TV mode to operate menus. | |
| TV needs reset | Press main power button to turn off and then on. | |
| Other issues | SLEEP TIMER active | Press standby button to turn TV on. |
| Screen size changing automatically (WSS/external device) | Press ZOOM button to resume previous mode. | |
| Magnetised equipment near TV | Keep equipment away from TV; use magnetically-shielded speakers. | |
| Picture tilted | Use PICTURE TILT function. | |
| Image stabilization delay | Normal operation; allow time for stabilization. | |
| Crackling sound (temperature change) | May be normal; if frequent, ask for service. | |
| Static electricity shock | Normal due to picture tube construction; not harmful. |