Brand: JVC
Category: Television
Document Type: Manual
Language: EN
Available Languages: EN , ES
Uploaded: Nov. 21, 2025, 6:33 p.m.
JVC shall under no circumstances be liable for loss and/or damage to the product caused by various factors, including fire, earthquake, and misuse.
Follow steps 1-7 to set up your TV, including checking accessories, inserting batteries, removing terminal covers, and connecting aerial, VCR, and mains. Initial settings will guide you through automatic channel search and setup.
Operate the TV using the remote control or on-TV buttons for volume and program selection. Navigate menus using dedicated buttons. Switching input modes and accessing the main menu are also covered.
Use the TV/DTV button to switch between digital and analog broadcasts. The information banner provides details about the current channel and program. The Electronic Programme Guide (EPG) allows channel selection and program reminders.
| Tips | Description |
|---|---|
| Can not turn the TV on? | Check that TV/VCR/DVD switch is set to TV position. TV may go to stand-by mode. |
| Can not turn the TV off? | Check that TV/VCR/DVD switch is set to TV position. |
| Care of the Screen | Clean with a slightly damp, soft cloth. Do not use abrasive solvents. |
| Colours of image on screen are abnormal | Check TV system, proximity to loudspeakers, or aerial direction. May degrade with multiple peripherals connected. |
| No Image on Display Screen | Check aerial connection, plugs, cable, and remote control buttons. TV may not be receiving transmission. |
| PC Picture | Check D-SUB cable, PC resolution. |
| Sound | Check for interrupted sound, external speakers, or balance settings. |
| Remote Control | Replace batteries if unresponsive. Select the correct menu. |
| No solution | Disconnect and reconnect power. If problem persists, contact service personnel. |
| Bad picture (in digital mode) | May be reception issue depending on area. Contact service provider if picture freezes or has block effects. |