Manual for LT-32DE9BU

Brand: JVC

Category: Television

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 8:03 p.m.

Manual Publish Date: 2008-01-01

Warranty Information

Information in this document is subject to change without notice.

1. Connect the power cord. The TV will enter standby mode.

2. Press the POWER button on the TV or remote to turn it on.

1. Use the NUMBER buttons or PA/V button to select a channel.

2. Press TV/RADIO to switch between digital TV and radio channels.

3. Press TV/DTV to switch between analog and digital TV channels.

4. Press BACK to return to the previous channel.

1. Press VOL+/- to adjust volume.

2. Press MUTE to temporarily silence the audio.

Error message	Possible causes	What to do
No or Bad Signal	The aerial is not pointing properly.	Adjust aerial. Check the cable from the aerial. If you cannot resolve the problem, you may need to have your aerial and installation tested by a professional.
The channel is scrambled or not available.	The channel has a signal, but no audio or video is provided.	Confirm if the channel is currently on air.
	The channel is for data broadcasting.	The channel cannot be viewed without the appropriate model that supports data channels.
	Smartcard is not plugged in.	Insert Smartcard.
	Wrong Smartcard is in use.	Insert the appropriate Smartcard for the channel(s) you wish to view.
Audio not available	The channel has a video signal, but no audio is provided.	Press the VOL+/- button on your remote control to confirm that the channel has audio options.
CI Module not installed.	CI Module (Conditional Access Module) is not installed.	Insert CI Module.
Invalid CI Module	CI Module is not inserted correctly	Reinsert CI Module.
	CI Module is not recognized.	Insert a different CI Module to check if your existing module is working.
	Wrong CI Module (Conditional Access Module).	Insert the correct CI Module.