Brand: JVC
Category: TV
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for LT-32A10BU
Uploaded: Nov. 21, 2025, 7:21 p.m.
Warranty Information
Refer to the retailer or JVC website for warranty details regarding disposal and product conformance.
First steps:
- Safety warnings: Connect to a 220-240V, 50Hz outlet. Do not allow the TV to fall, attempt self-repair, cut the power cord, or expose to moisture. Unplug when not in use. Avoid obstructions to ventilation. Handle the LCD panel with care. Never place objects on the TV or insert objects into openings. Never listen to headphones at high volume. Do not carry the TV alone.
- Getting started: Attach the stand following page 4 instructions. Ensure correct power requirements. Wall mounting requires an optional unit and qualified technician. Install with adequate room for ventilation. Check accessories and insert batteries. Connect external devices like VCRs, DVD players, game consoles, and satellite receivers using the appropriate ports (HDMI, DVI, Component, SCART, Audio).
- Basic Operation: Turn on the TV and remote. Use the remote to change channels, adjust volume, mute sound, and access menus. You can view TV, Teletext, and connected videos/DVDs.
- Customization: Adjust Picture, Sound, and Features settings to your preference. Set up initial channel registration, edit channels, and configure external input settings.
Troubleshooting and error codes
| Problem | Actions | page |
|---|---|---|
| Severe noise or snow | • Is the TV connected correctly to the aerial? • Change the direction of the aerial. • Is the aerial or its cable damaged? • Consult your retailer |
– |
| Patterns, stripes or noise | • Is the receiving interference from high-voltage power lines or wireless transmitters? • Consult your retailer • Are connected devices too close to the TV? • Insert the minimum distance between the aerial and the cause of interference until no interference |
– |
| Ghosting (Doubling of images) | • Are you receiving interference from signals reflected off mountains or buildings? • Adjust the direction of your aerial, or change to a good-quality directional aerial |
– |
| I can't turn it on! | • Is the power cord connected to the AC outlet correctly? | – |
| The remote control doesn't work! | • Are the batteries flat? • Are you more than 7 meters away from the TV? • Is the "MODE (TV, VCR, DVD, AUDIO) " set to "TV"? • When viewing Teletext, the TV menu bar does not appear. • Depending on the stability of the signal, there may be a time lag when changing channels. |
– |
| Remote control stops working | • Unplug TV, severeil minutes later plug it in again. | – |
| Aspect ratio changes unintentionally | • Press ZOOM to return to your settings. | 17 |
| Black or white dots appear on the screen | • LCD panels use fine dots ("pixels") to display images. While more than 99.99% of these pixels function properly, a very small number of pixels may not light, or may light a little. Time. Please understand that this is not a malfunction. |
– |
| Poor picture quality | • Change the "Picture Mode" setting. Unnatural Colour >>> Adjust "Colour" and "Backlight" Which your Colour System" • Noise : Set the following functions. Picture Mode : Standard Digital VNR : On DigiPure : Off • Dual View >>> Set to the following functions. Picture Mode : Bright Digital VNR : Off DigiPure : On |
18 18 19 18 19 19 18 19 19 |
| Strange picture when using an external device | • If the top of the image is distorted, check the video signal quality itself. • If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace-scanning). |
– |
| Blue screen appears on the screen | • Switch "Blue Back" to "Off". | 21 |
| Poor sound | • Adjust the "Bass" and "Treble". • If receiving a poor signal in "Stereo / I-II", switch to "O" (monaural). • Change the broadcasting system using "Manual" |
20 20 13 |
| No sound from the audio component | • Audio signals received from EXT-4, EXT-5 and EXT-6 cannot be sent to the AUDIO OUT terminal. | – |
| Wrong screen size | • Switch "Size" in "HDMI Setting" to "1" or "2". | 21 |
| No picture, no sound | • Use the cable marked with HDMI logo. HDMI | – |
| Functions terminal OUT | • It is not a malfunction. Some functions (dark background) in the menu do not work depending on the situation. | – |
| No picture, no sound | • Some inputs do not output from OUT terminal | – |
| HDMI | • Check if the device is compliant with HDMI. • Switch "Audio" in "HDMI Setting" to "Digital" or "Auto" for HDMI devices, or "Analogue" or "Auto" for DVI devices. (Not available for HDMI-2 and HDMI-3) |
21 |
| Green and distorted screen | • Wait a little for the signal to stabilize when switching the signal format for an "HDMI" device. | – |