Brand: JVC
Category: Video Player
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for XL-MV7000GD
Uploaded: Nov. 21, 2025, 7:27 p.m.
Warranty Information
Retain this information for future reference.
Basic Operations
- Connecting the player to a TV or amplifier/receiver using the Audio Video cable.
- Connecting the player to an amplifier/receiver equipped with the analog discrete inputs.
- Setting the Video out select to NTSC, PAL, or MULTI mode.
- Installing batteries in the remote control.
- Connecting the AV COMPU LINK cable.
- Connecting the power cord.
Inserting/removing disc(s)
- Press the (OPEN/CLOSE) button to open the disc tray.
- Place the disc in the round recess of the tray with label side up.
- Press the (OPEN/CLOSE) button again to close the tray.
Starting to play disc(s)
- Press the (PLAY)/SELECT button or a CD button to start playing.
Troubleshooting and error codes
| Symptom | Possible cause | Remedy |
|---|---|---|
| Power does not come on. | Power plug is disconnected from AC outlet. The POWER button is in the OFF position. |
Firmly connect the plug to AC outlet. Depress the POWER button. |
| Remote control does not work. | Batteries are exhausted. The tip of the remote control unit is not pointed at the receiving part of the player. |
Replace the batteries with new ones. Use the remote control correctly. |
| No image is displayed on the monitor. | The video cable is not connected. The TV is not set in video mode. |
Firmly connect the cable. Set the TV in video mode. |
| Playback does not start. | An incompatible disc is loaded. No disc is loaded. Disc is loaded upside down. |
Load a disc compatible with the player. Load a disc. Reload the disc with the label up. |
| Speaker does not produce sound. | Audio cable is not connected. Operation of the external amplifier is incorrect. |
Firmly connect the cable. Operate the amplifier correctly. |
| Sound is distorted or noise is generated. Image is garbled. | Disc is dirty. Connection is wrong. |
Wipe the disc surface with a soft cloth. Correctly connect cables. See page 2. |
| Sound is intermittent. Image is garbled. | Disk is dirty. | Wipe the disc surface with a soft cloth. |
| Disc tray does not come out when (OPEN/CLOSE) button is pressed. | Power plug is disconnected from the power outlet. | Firmly insert the plug into the outlet. |
| Operation is not possible. | Microcomputer malfunctions due to lightning or static electricity. | Turn the power off, then on again. |
| The AV COMPU LINK system does not work correctly. | The player's AV COMPU LINK setting is not correct. | Make the setting correctly. |