Manual for KFC-P703

Important Safeguards

Read this page carefully to keep your safety.

• 1. Suffocation: Dispose of polyethylene bags out of reach of children.
• 2. Power supply voltage: Connect speakers to DC 12V, negative ground.
• 3. Water and moisture: Do not install speakers in locations subject to water or moisture.
• 4. Dust and unstable locations: Do not install speakers in unstable or dusty locations.
• 5. Modification: Do not attempt to open or modify the unit.
• 6. Cleaning: Use a soft, dry cloth. Do not use gasoline, naphtha, or solvents.
• 7. Abnormal smell: If smoke or abnormal smell occurs, switch power OFF immediately and contact your dealer.

Mounting Locations

Precautions:

• Check mounting space with the supplied template.
• Keep wiring away from motors and high-voltage leads to prevent noise pick-up.
• Keep wiring away from moving parts and sharp edges to prevent short-circuit.
• Be careful not to brush the unit when removing or installing the grille.
• Do not switch ON power until wiring is completed.

Installation

1. Select the mounting position.
2. Place the template and mark hole positions.
3. Cut a large hole and make screw holes.
4. Install the unit as shown in the figures.

System Connections: Speaker cords are not supplied. Obtain cords of required length and terminate with female spade connectors.

Note: When using as a 3-way speaker with a subwoofer, connect nonpolar capacitors in series (HPF).