Brand: KENWOOD
Category: Dishwasher
Document Type: Manual
Language: EN
Manual for KID60S15
Uploaded: Nov. 21, 2025, 7 p.m.
Manual Publish Date: 2015-04-01
- Safety First: Always switch off and unplug before cleaning or maintenance. Keep children away from detergents and the appliance. Ensure proper earthing.
- Loading: Remove food residues. Load items so water can reach all surfaces. Place hollow items upside down. Load sharp items with points downwards.
- Detergent & Rinse Aid: Use only dishwasher-specific detergents and rinse aids. Fill compartments as instructed.
- Operation: Select program, press ON/OFF. Close door. The cycle will start.
- End of Cycle: Appliance beeps, indicator lights up. Leave door slightly ajar to prevent steam damage.
- Unloading: Allow dishes to cool. Unload lower basket first.
- Maintenance: Clean filters and spray arms regularly. Wipe external surfaces with a damp cloth.
Troubleshooting and error codes
| codes | possible causes | remedy |
|---|---|---|
| F1 | Water overflow warning | Turn the power to the machine off and close the tap. Contact service. |
| F2 | Waste water in the machine cannot be discharged | Water discharge hose is clogged. The filters might be clogged. Power off-on your machine, then press and hold down the P button for 3 seconds. If the error continues, contact service. |
| F3 | Continuous water input | Close the tap. Contact service. |
| F5 | Inadequate water supply | Make sure the water input tap is totally open and that there is no water cut. Close the water input tap, separate the water input hose from the tap and clean the filter at the connection end of the hose. Restart your machine, contact service if the error continues. |
| F6 | Faulty heater sensor | Contact service. |
| F7 | Overheating (temperature in the machine is too high) | Contact service. |
| F8 | Heater error | Contact service. |
| F9 | Divisor position error | Contact service. |
| FE | Faulty electronic card | Contact service. |
| problem | The dishwasher does not start. | The door is not properly closed. The unit is not connected to the mains. The unit is not switched on. |
| problem | The drain pump is not working properly. | The door is not properly closed. The unit is not connected to the mains. The unit is not switched on. |
| problem | The anti-flooding system has operated. | Disconnect from the mains. Disconnect the water inlet. Call a qualified technician. |