Installation Guide for KIFF5017

Installation Guide for KIFF5017

Brand: KENWOOD

Category: Refrigerator

Document Type: Installation Guide

Language: EN

Uploaded: Nov. 21, 2025, 8:30 p.m.

Switching on your unit:

1. Connect the mains cable. Lights and a beep will signal activation. Default temperature is 5°C. 2. Wait 24 hours for the unit to cool sufficiently before adding food. 3. To check temperature, use a special thermometer. Recommended fridge temp: 5°C or lower. Recommended freezer temp: -18°C or lower.

Control panel:

- Temp: Adjusts the unit's temperature. - Super Cool: Rapidly decreases temperature for 3 hours. - Alarm: Flashes and sounds for abnormal conditions or if the door is left open for over 2 minutes. Press to deactivate. - Power: Switches the unit on or off.

Adjusting the temperature:

Press the Temp button to set the desired internal temperature.

Noises inside the unit:

Normal operating noises are caused by the refrigerant circulation and compressor. This is not a fault.
Privacy Policy