Brand: KENWOOD
Category: Refrigerator
Document Type: Manual
Language: EN
Manual for KNFD2MT18 / KNFD2MX18
Uploaded: Nov. 21, 2025, 8:26 p.m.
Warranty Information
Warranty information is not explicitly stated in this section.
Switching on your unit
- Connect the mains cable to the mains socket.
- Press °C to set the temperature for the fridge compartment (2 to 6°C) and press °C for the freezer compartment (-16 to -22°C).
- Wait 24 hours before filling with food to ensure adequate cooling.
Super Freeze Mode
Press °C to activate. The freezer compartment temperature will be lowered quickly. It deactivates automatically after 26 hours or can be switched off manually.
Holiday Mode
Press °C to activate. The fridge temperature is set to 15°C. Do not store food in the fridge when this mode is active. Switch off manually.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not start. | Unit is not plugged in. | Plug in the unit. |
| Fuse has blown or circuit breaker has tripped. | Check and replace fuse or reset breaker. | |
| Lights do not work. | Bulb has blown. | Contact service agent. |
| Compressor runs too often. | The door is open too long or too often. | Minimize door opening. |
| Temperature is not set correctly. | Adjust temperature setting. | |
| Ambient temperature is too high. | Ensure unit is not near heat sources. | |
| Excessive frost in the freezer. | Door is not closed properly. | Ensure door is sealed. |
| Door is opened too often. | Minimize door opening. | |
| Unit is not cold enough. | Door is open too long or too often. | Minimize door opening. |
| Temperature is not set correctly. | Adjust temperature setting. | |
| The unit is overcrowded. | Remove some food. | |
| Condensation on the outside of the unit. | Wipe off moisture. If problem persists, contact technician. |