Brand: KitchenAid
Category: Dishwasher
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for kdtm354dss
Uploaded: Nov. 21, 2025, 8:11 p.m.
Manual Publish Date: 2014-04-01
Warranty Information
This is a limited warranty covering parts and labor for the first year, specific components for years two through five, and the stainless steel tub and inner door liner for a lifetime.
Loading the Dishwasher: Remove food scraps, bones, and toothpicks. Load items with soiled surfaces facing down and inward. Avoid overlapping. Place plastics, small plates, and glasses in the upper rack. Ensure sharp items like knives have handles up. Silverware should be placed with sharp points down to reduce cut injuries.
Adding Detergent: Use only automatic dishwasher detergent. Add just before starting a cycle for best results. Premeasured detergents (packs, tablets) are recommended.
Adding Rinse Aid: Essential for good drying. Fill the dispenser until the indicator level is at 'Full'.
Selecting a Cycle: Choose from ProWash, Tough, Normal, Light, Express Wash, or Rinse Only based on soil level and needs.
Selecting Options: Customize cycles with options like ProDry, ProScrub, Hi-Temp Wash, Sani Rinse, Top Rack Only, and Delay.
Starting a Cycle: Close the door firmly. Select cycle and options. Press START/RESUME. If the door is opened, press START/RESUME again.
Troubleshooting and error codes
| If you experience | Check the following: | Recommended Solutions |
|---|---|---|
| The Clean light is flashing | Is the overfill protection float able to move up and down freely? Press down to release. Be sure the water supply is turned on to the dishwasher. | |
| Dishes do not dry completely | Plastic and items with nonstick surfaces may require towel drying. Use rinse aid with the ProDry™ option. Ensure proper loading and item placement. Unload bottom rack first. | |
| Spotting/Filming | Use liquid rinse aid and the correct amount of detergent. Check for hard water issues and adjust detergent/rinse aid. Ensure incoming water temperature is at least 120°F (49°C). Try Hi-Temp Wash or Sani Rinse options. | |
| Dishwasher does not clean completely | Ensure correct loading. Select appropriate cycle. Verify water temperature is at least 120°F (49°C). Use fresh detergent. Scrape food from dishes. Avoid suds from incorrect detergents or excessive amounts. |