Brand: KitchenAid
Category: Dryer
Document Type: Manual
Language: EN
Manual for KEYE900T
Uploaded: Nov. 21, 2025, 6:03 p.m.
Warranty Information
Offers a one-year full warranty, followed by limited warranties on specific parts for up to ten years.
Selecting a Cycle:
- Touch ON.
- Touch a CYCLE SELECTION that matches the load type (e.g., REGULAR/HEAVY, PERM'T PRESS, DELICATES).
- Touch a CUSTOM DRY selection for desired dryness level or select TIME for timed drying.
- Options like SMOOTH GUARD and CYCLE SENTRY can be selected as needed.
Manual Time Drying:
- Touch TIME UP or TIME DOWN to set desired time (1-99 minutes).
- The dryer will begin tumbling immediately.
Important Notes:
- Clean lint screen before each load.
- For first few loads, use NORMAL to determine dryness. Adjust MORE/VERY DRY or LESS for subsequent loads.
- Use MOIST DRY if ironing clothes after drying.
- AIR TUMBLE provides 20 minutes of drying without heat.
Troubleshooting and error codes
| IF YOUR DRYER... | POSSIBLE CAUSE | CORRECTION |
|---|---|---|
| Does not run | Power supply cord not plugged in. | Plug into a live circuit with proper voltage. |
| Door not closed tightly. | Close the door tightly. | |
| Blown fuse or tripped circuit breaker. | Check home's main fuses or circuit breaker box. | |
| ON not touched. | Touch ON. | |
| No CYCLE SELECTION made. | Touch a CYCLE SELECTION. Dryer will not tumble until a selection is made. | |
| Does not heat | AIR TUMBLE selection used (does not use heat). | Select a heated cycle. |
| Heat not used during last few minutes of cycle. | This is normal. | |
| Gas not turned on (for gas dryers). | Touch OFF, turn on gas, wait 5 minutes, touch ON, reset controls. | |
| Blown fuse or tripped circuit breaker (electric dryer). | Electric dryers require two fuses or a circuit breaker. If one is blown, dryer may run but not heat. | |
| Drying times seem too long | Lint screen is dirty. | Clean the lint screen. |
| Load is too large. | Reduce load size. | |
| Refer to page 6 for more information. | Refer to page 6 of the DRYER GUIDE. | |
| TIME Display shows "E1" or "E2" | Internal error. | Call for service. |