Installation Guide for 24" (65 CM), 30" (78.2CM) AND 36" (92.2 CM) ELECTRIC INDUCTION COOKTOP

COOKTOP SAFETY

Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

DANGER: You can be killed or seriously injured if you don't immediately follow instructions.

WARNING: You can be killed or seriously injured if you don't follow instructions.

INSTALLATION REQUIREMENTS

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools and Parts

Parts Supplied: Brackets (2), #6 x 3/4" (1.9 cm) clamping screws (4), #8 x 3/8" (9.5 mm) sheet metal screws (6 screws for 24" [65 cm] models, and 7 screws for 30" [78.2 cm] and 36" [92.2 cm] models).

Parts Needed: A UL listed or CSA approved strain relief, UL listed wire connectors, A UL approved junction box or 240 V outlet.

Location Requirements: Make sure you have everything needed for correct installation. It is the responsibility of the installer to comply with the installation clearances specified in these instructions. IMPORTANT: Observe all governing codes and ordinances. When installing cooktop, use minimum dimensions given.

INSTALLATION INSTRUCTIONS

Prepare Location: Decide on the final location for the cooktop. NOTE: Countertop must be 13/16" (3.0 cm) to 2" (5.1 cm) thick.

Install Brackets: Follow specific instructions for marble or wood countertops.

Install Cooktop: Use two or more people to move and install. Ensure clips align with brackets.

Make Electrical Connection: Follow detailed steps for 4-wire or 3-wire connections. Ensure proper grounding.

Complete Installation: Verify all parts are installed, tools are present, and packaging is disposed of. Clean the cooktop. Reconnect power.