Manual for KSSC42QMS01

Manual for KSSC42QMS01

Brand: KitchenAid

Category: Refrigerator

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 9:15 p.m.

Manual Publish Date: 2004-01-01

Warranty Information

This manual details a two-year full warranty on the refrigerator and a limited warranty on sealed refrigeration system parts.

Refrigerator Operation

  • Power On/Off: Located behind the top grille, requires removing the grille assembly to access.
  • Temperature Control: Adjust refrigerator and freezer temperatures using the '+' and '-' controls. Wait 24 hours between adjustments. Recommended set points are 0°F (-18°C) for the freezer and 37°F (3°C) for the refrigerator.
  • Water System: Flush the water system after installation by dispensing 6 quarts of water. Ensure water pressure is between 30-120 psi.
  • Ice Maker: Turn on/off using the wire shutoff arm or switch. Allow 24 hours for the first batch of ice and discard the first three batches.
  • Special Features: Includes features like Holiday Mode, Max Cool, and alarms for over-temperature and door-open.

Troubleshooting and error codes

ProblemPossible CauseSolution
Refrigerator Not Operating
Refrigerator not operatingPower supply cord unpluggedPlug into a grounded 3 prong outlet.
Fuse or circuit breaker trippedReplace fuse or reset circuit breaker.
Refrigerator/freezer control set to OFFSee "Using the Control(s)."
Refrigerator defrostingRegularly scheduled automatic defrost cycle.
Refrigerator not cooling (digital controls)Turn unit OFF then ON to reset. If problem persists, call for service.
Lights Do Not Work
Lights do not workPower supply cord unpluggedPlug into a grounded 3 prong outlet.
Light bulb loose or burned outSee "Changing the Light Bulb(s)."
Door open more than 10 minutes"Door Open" indicator light flashes, interior lights off. See "Door Open."
Water in Defrost Drain Pan
Water in defrost drain panRefrigerator defrostingWater will evaporate. Normal.
High humidityWater takes longer to evaporate. Normal.
Motor Seems to Run Too Much
Motor runs too muchRoom temperature hotter than normalMotor runs longer. Normal.
Large amount of food addedMotor runs longer to cool. Normal.
Doors opened oftenMotor runs longer. Conserve energy by limiting door openings.
Controls not set correctlySee "Using the Control(s)."
Doors not closed completelyClose doors firmly. See "Doors will not close completely."
Condenser coils dirtyClean coils. Refer to "Cleaning" section.
Door gaskets not sealedContact technician.
NOTE: High-efficiency motor may run longer than old models.
Refrigerator Seems to Make Too Much Noise
Excessive noiseNormal soundsSee "Normal Sounds."
Ice Maker Not Producing Ice or Producing Too Little Ice
Ice maker issuesIce maker recently installedAllow 3-4 days to fill bin.
Freezer temperature not cold enoughWait 24 hours after hookup. See "Using the Control(s)."
Ice maker wire shutoff arm in OFF position (some models)Lower arm to ON (down) position. See "Ice Maker and Storage Bin."
Ice maker switch in OFF position (some models)Move switch to ON (left) position. See "Ice Maker and Storage Bin."
Water line shutoff valve offTurn on water valve. See "Connect Water Line to Refrigerator."
Ice maker mold has no ice / no ice producedEnsure water supply is connected and shutoff valve is on. See "Connect Water Line to Refrigerator."
Ice cube jammed in ejector armRemove ice with a plastic utensil. See "Ice Maker and Storage Bin."
Large amount of ice removed recentlyAllow 3-4 days to refill.
Controls not set correctlySee "Using the Control(s)."
Water filter installed/cloggedCheck filter installation instructions. If not clogged or installed incorrectly, call for service.
NOTE: If problem persists, check water line. Call for service.
Privacy Policy