Brand: KitchenAid
Category: Washer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for PRO LINE™ FRONT-LOADING AUTOMATIC WASHER
Uploaded: Nov. 21, 2025, 7:42 p.m.
Manual Publish Date: 2006-05-01
Warranty Information
Five-year limited warranty on parts and labor, with additional component coverage up to ten years.
Starting Your Washer: Ensure the washer is level and all feet are firmly on the floor. Plug into a grounded outlet. Select a wash cycle, then press START. Use only HE High Efficiency detergent.
Loading: Sort laundry by color and fabric type. Do not overload. Mix large and small items. Use mesh bags for small items. Close zippers, snaps, and hooks. Empty pockets.
Using the Dispenser: The dispenser has four compartments for detergent, bleach, and fabric softener. Add products to the correct compartment. Use only HE detergent.
Controls: Select cycle, soil level, temperature, and spin speed. Options can be added to customize cycles. Status display shows cycle progress.
Troubleshooting and error codes
| Error Codes | Solutions |
|---|---|
| "FH" (Water Inlet Problem) | Check faucets, inlet hose screens, kinked or frozen hoses. Re-select cycle and press START. |
| "F02" (Drain Problem) | Check kinked, frozen, or clogged drain hose. Ensure hose is not too high. Re-select cycle and press START. |
| "SUD" (Suds Routine) | Excess suds detected. Routine removes suds and ensures proper rinsing. Use only HE detergents. |
| "F" Variables [F4 to F16] (Electrical Problem) | Cancel cycle, select DRAIN/SPIN if excess water. Re-select cycle and press START. |
| Noisy, vibrating, off-balance | Ensure washer is level, all four feet contact floor, and nuts are tightened. Install on a sturdy floor. Normal operational sounds may occur. Remove shipping bolts. |
| Leaking | Check door seal, use HE detergent, ensure fill hoses are tight with correct washers, drain hose is properly installed, and sink/drain is not clogged. |