Brand: LAMONA
Category: Oven
Document Type:
Language: EN
Manual for LAM3410 - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:42 p.m.
Manual Publish Date: 2022-03-01
Warranty Summary
LAMONA LAM3410 oven comes with a 3-year guarantee against manufacturing defects.
Setting the Correct Time:
- Touch the + or - buttons while the display is flashing to adjust the time.
How to use the Oven & Grill:
- Close the oven door.
- Set thermostat knob to the desired temperature.
- Set function knob to the required operating mode.
Operating Modes:
- Lamp: Turns on oven light and cooling fan.
- Circular Heating Element and Fan: For gentle cooking and baking on multiple levels.
- Grill and Fan: For grilling thicker food items.
- Defrosting: Circulates room temperature air to defrost food.
- Grill: For grilling mixed grills, kebabs, and gratin dishes.
Troubleshooting and error codes
| Symptoms | Possible cause | Solutions |
|---|---|---|
| Oven emits steam when it is in use. | • Food is being cooked with a high water content. | It is normal that steam escapes from food during cooking. This is not a fault. |
| Product emits metal noises while heating and cooling. | • When the oven cavity heats up or cools down parts will expand and contract. | This is quite normal and the oven is designed to accommodate such movement (this is not a fault). |
| Product does not operate. | • The mains fuse is maybe defective or has tripped. • Product is not connected properly. Check all power connections. | Check fuses in the fuse box. If necessary, replace or reset them. |
| Oven light does not work. | • Oven bulb is defective Replace oven bulb. • Power is cut | Check if there is power. Check the fuses in the fuse box. If necessary, replace or reset the fuses. |
| Oven does not heat. | • Function and / or temperature are not set. • The timer is not adjusted correctly. Reset the oven timer. • Power is cut | Set the function and the temperature with the Function and/or Temperature knob/key. Check if there is power. Check the fuses in the fuse box. If necessary, replace or reset the fuses. |
| No reaction of the touch user interface | • Steam and condensation on the user interface panel | Clean with a microfibre cloth the user interface panel to remove the condensation layer |
| Display shows 'STOP' | • Child lock active | See page 16 |
| Condensation on door or control panel | • Expected in normal function. Not a product fault. | No action required |
| Test error code | • Possible timer fault | Call the Lamona Service line on 0344 460 0006 |