Brand: LAVATHERM
Category: Home Appliances
Document Type: Manual
Language: EN
Manual for 720
Uploaded: April 20, 2026, 7:37 p.m.
Warranty Information
Repairs are not free of charge during the warranty period if due to user error, misuse, or if literature advice is not followed.
How to use your LAVATHERM
Operating and Indicator Controls
- Drying time selector: Controls on/off, drying time, and cold air setting. Turn clockwise for drying time.
- Door release button: Press to open the loading door.
- Start button: Press to begin the selected programme.
- Button for temperature sensitive materials ('S' button): Press for lower heat drying.
- Acoustic signal button: Press to be alerted when the programme ends.
Switching off the machine
Turn the drying time selector to "0".
"Empty the condensed-water container" indicator
When this indicator lights up, the container is full and needs emptying. The machine will not continue until the empty container is re-inserted.
Adding and removing clothes during drying
Press the door release button to add or remove laundry. Take care as the drum may be hot. Close the door and press the start button.
Cooling phase and anti-crease cycle
Before the programme ends, the laundry is cooled. An automatic 30-minute anti-crease cycle follows if laundry is not removed, keeping it loose and fluffy.
Cleaning the fluff filter
The fluff filter, located inside the loading door, must be cleaned after each drying programme.
Emptying the condensed-water container
Empty the container after each drying programme, unless it is plumbed for drainage.
Troubleshooting and error codes
| If the appliance is not working: | If the drying result is unsatisfactory: |
|---|---|
| Have you pressed the start button? | Have you selected the correct drying time? |
| Have you selected a drying time? | Have you cleaned the fluff filter? |
| Have you closed the loading door? | Have you used the recommended load capacity? |
| Has the plug been inserted into the socket? | Has the laundry been spun sufficiently to extract water? |
| Is the fuse in working order? | Is the air vent clear? |
| Has the condensed-water container been emptied and inserted correctly? | |
| Has the overflow protector been activated (see page 12)? |