Brand: Lenovo
Category: Network Storage
Document Type: Installation Guide
Language: EN
Available Languages: EN , ES
Installation Guide for NE1032T
Uploaded: Nov. 21, 2025, 8:08 p.m.
Manual Publish Date: 2017-06-01
Warranty Information
Refer to the product Warranty Information document for details.
The NE1032T is a 1U rack-mountable GbE switch. It can be mounted horizontally or vertically. It supports simultaneous wire-speed transport of multiple packets with low latency. It features 24 100/1000/10G BASE-T RJ45 ports, 8 10G SFP+ Uplinks, and 10 Gigabit Ethernet (GbE) SFP+ ports. Management can be done via console port, remote network connection, web interface, or SNMP. It has redundant, hot-swap power supply modules and hot-swap fan modules.
Troubleshooting and error codes
| Issue | Possible Cause | Solution |
|---|---|---|
| System LED Is Not Lit | Power is not applied. | Ensure that the power cords are connected and the power source is active. |
| Port Link LED Is Not Lit | Link is down. | Verify that the connected device is powered on and its link is up. Check the cable connection. |
| Temperature Sensor Warning | High temperature detected. | Ensure proper airflow and check that fan modules are installed correctly. Clean air filters if necessary. |
| Switch Does Not Initialize (Boot) | Power issue or hardware failure. | Check power connections. If the issue persists, contact Lenovo support. |