Brand:
LG
Category: Air Conditioner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Uploaded: Nov. 21, 2025, 8:55 p.m.
This product has a lifetime of 7 years from the date of transfer to the user.
Normal Cooling: Select High Cool or Low Cool operation, then set the thermostat to your desired temperature. Adjust as needed.
Maximum Cooling: Select High Cool and set the thermostat to the highest mark.
Quieter Operation: Select Low Cool and set the thermostat as needed.
Caution: After cooling operation or fan-only mode, wait at least 3 minutes before resetting to cooling operation.
Air Direction: Use the Control Tabs to direct airflow left, right, up, down, straight ahead, or a combination.
Care and Maintenance: Turn off and unplug the unit. Clean the air filter every 2 weeks. Wipe grilles and cabinet with a damp cloth and mild detergent. Ensure proper drainage.
| Problem | Possible Causes | What To Do |
|---|---|---|
| Air conditioner does not start |
• The air conditioner is unplugged. • The fuse is blown/circuit breaker is tripped. • Power failure. |
• Make sure the air conditioner plug is pushed completely into the outlet. • Check the house fuse/circuit breaker box and replace the fuse or reset the breaker. • If power failure occurs, turn the mode control to Off. When power is restored, wait 3 minutes to restart the air conditioner to prevent tripping of the compressor overload. |
| Air conditioner does not cool as it should |
• Airflow is restricted. • The THERMOSTAT may not be set high enough. • The air filter is dirty. • The room may have been hot. • Cold air is escaping. • Cooling coils have iced up. |
• Make sure there are no curtains, blinds or furniture blocking the front of the air conditioner. • Turn the knob to a higher number. The highest setting provides maximum cooling. • Clean the filter at least every 2 weeks. See the care and maintenance section. • When the air conditioner is first turned on you need to allow time for the room to cool down. • Check for open furnace floor registers and cold air returns. • Set the air conditioner's vent to the closed position. • See Air Conditioner Freezing Up below. |
| Air conditioner freezing up | • Ice blocks the air flow and stops the air conditioner from cooling the room. | • Set the mode control at the Fan Only or the Turbo Cool with the thermostat at 1 or 2. |