Brand:
LG
Category: Dishwasher
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for LDFC353**
Uploaded: Nov. 21, 2025, 8 p.m.
Manual Publish Date: 2024-01-18
Warranty Information
Limited warranty covers defects in materials and workmanship for specified periods.
- Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times.
- This abridged owner's manual addresses user safety, precautions, and installation information.
- To view the complete owner's manual, visit the LG website or scan the QR code.
Troubleshooting and error codes
| Problem | Possible Cause and Solution |
| IE | Water Inlet Problem: Check water hose for obstructions, kinks, or freezing. Check water supply. |
| DE | Drainage Problem: Check drain hose for obstructions, kinks, or freezing. Air gap or garbage disposal is clogged. Filters are clogged. |
| bE | Excessive suds caused by improper detergent: Do not use hand dishwashing detergent. Use only automatic dishwasher detergents. May appear if dirty dishes with foamy food are loaded. Turn off and start a new cycle. |
| RE | Dishwasher not leveling: Ensure the appliance is leveled properly. |
| FE | Water Leak: Turn off water supply and contact LG Customer Information Center. |
| AE | Excessive amount of water: Dishwasher emits an alert and the drain pump operates intermittently. If turned off, it will restart automatically until the error is resolved. |
| HE | Heating circuit failure: Contact LG Customer Information Center. |
| LE | Water temperature sensor problem: Contact LG Customer Information Center. |
| LE | Wash motor problem: Contact LG Customer Information Center. |
| nE | Vario motor problem: Contact LG Customer Information Center. |
| n:#, U:#, d:#, # (# is a number). | Test Mode selected: Not an error code. Turn dishwasher off and on. |
| LO, L1, L2, L3, L4 | Rinse Aid Assist Level Mode selected: Not an error code. Indicates the current rinse aid level. |
| CL | Control Lock is activated: Not an error code. Press and hold Flex Zone and High Temp. simultaneously for three seconds. |