Brand:
LG
Category: Home Theater System
Document Type: Manual
Language: EN
Manual for DV456 / DV415 / HTR456
Uploaded: Nov. 21, 2025, 8:14 p.m.
Warranty Information
This product comes with a 12-month warranty on all parts from the date of purchase.
- Connect the DVD player to your TV and audio equipment for playback.
- Insert a disc into the tray and use the Play button to start playback.
- Use the remote control for various functions like pausing, skipping tracks, adjusting volume, and accessing menus.
- The setup menu allows for adjustments to language, display, audio, and other settings.
- Troubleshoot common issues like no power, no picture, or no sound by following the guide.
Troubleshooting and error codes
| Symptom | Possible Cause | Correction |
|---|---|---|
| No power. | The power cord is disconnected. | Plug the power cord into the wall outlet securely. |
| The power is on, but the DVD player does not work | No disc is inserted. | Insert a disc. (Check the disc indicator in the display window is lit.) |
| The TV is not set to receive DVD signal output. | Select the appropriate video input mode on the TV. | |
| No picture. | The video cable is not connected securely. | Connect the video cable securely. |
| The equipment connected with the audio cable is not set to receive DVD signal output. | Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. | |
| No sound. | The power of the equipment connected with the audio cable is turned off. | Turn on the equipment connected with the audio cable. |
| The DVD player does not start playback. | The AUDIO options are set to the wrong position. | Set the AUDIO option to the correct position, then turn on the DVD player again by pressing POWER. |
| An unplayable disc is inserted. | Insert a playable disc. (Check the disc type and regional code.) | |
| The remote control does not work properly. | The rating level is set. The remote control is not pointed at the remote sensor on the DVD player. | Change the rating level. Point the remote control at the remote sensor of the DVD player. |
| Sound not coming properly in 5.1 channel. | The remote control is too far from the DVD player. Check the setting in "Set up Menu". Default audio output selection in 2 channel only. | Operate the remote control closer to the DVD player. Change the audio output from 2 ch. to 5.1 ch. in Set up > Audio > Speaker Setup > 5.1Channel. |