Manual for V290H

Manual for V290H

Brand: LG logo LG

Category: Home Theater System

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 8:21 p.m.

Warranty Information

No specific warranty period is mentioned in the provided pages. Please refer to the full manual for details.

Operation Summary

Playing a Tape:

  • Ensure the DVD+VCR is connected to the TV and powered on.
  • Insert the video cassette with the window side facing up.
  • Press 'PLAY' to start playback.
  • Use 'PAUSE/STEP' to pause or play frame-by-frame.
  • Use 'FORWARD' and 'BACKWARD' for picture search.
  • 'CM SKIP' allows skipping commercial breaks.
  • 'OPR' adjusts playback quality automatically.
  • Press 'STOP' to end playback.

Instant Timer Recording (ITR):

  • Connect the DVD+VCR and turn it on.
  • Insert a video cassette.
  • Select the desired programme number or input source (AV1, AV2, AV3).
  • Choose between Standard Play (SP) or Long Play (LP).
  • Press 'REC/ITR' to start recording, increasing time by 30 minutes per press (up to 9 hours).
  • Use 'PAUSE/STEP' to skip scenes.
  • Press 'STOP' to end recording.

Troubleshooting and error codes

Symptom Cause Correction
No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely.
The power is on, but the DVD player does not work. • No disc is inserted. • Insert a disc.
No picture. • The TV is not set to receive this unit's signal output.
• The video cable is not connected securely. 		• Select the appropriate video input mode on the TV so the picture from the this unit appears on the TV screen.
• Connect the video cable into the jacks securely.
No sound. • The equipment connected with the audio cable is not set to receive DVD signal output.
• The audio cables are not connected securely.
• The power of the equipment connected with the audio cable is turned off.
• The Audio option is set to the wrong position. 		• Select the correct input mode of the audio receiver so you can listen to the sound from the this unit.
• Connect the audio cable into the jacks securely.
• Turn on the equipment connected with the audio cable.
• Set the Audio option to the correct position, then turn on the DVD player again by pressing POWER.
The picture is poor. • The disc is dirty.
• The TV channels are not tuned in properly. 		• Clean the disc.
• Check tuning, carry out tuning again.
The DVD player does not start playback. • An unplayable disc is inserted.
• The disc is placed upside down.
• The disc is not placed within the guide.
• The disc is dirty.
• The Rating level is set. 		• Insert a playable disc. (Check the disc type and Regional code.)
• Place the disc with the playback side down.
• Place the disc on the disc tray correctly inside the guide.
• Clean the disc.
• Cancel the Rating function or change the rating level.
The remote control does not work properly. • There is an obstacle in the path of the remote control and this unit.
• The batteries in the remote control are exhausted. 		• Remove the obstacle.
• Replace the batteries with new ones.
Video tape cannot be inserted. • Is the cassette compartment empty? • Eject the tape in.
No Hi-Fi sound • Audio mode is not set properly. Select "STEREO" by repeatedly pressing "AUDIO" on the remote control.
Privacy Policy