Brand: Makita
Category: Power Tool
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for RP1800
Uploaded: Nov. 21, 2025, 6:02 p.m.
Warranty Information
Makita offers a one-year limited warranty against defects in workmanship and materials from the date of original purchase.
To operate the router:
- Ensure the shaft lock is released.
- Press the lock button and pull the switch trigger to start. Release to stop.
- For continuous operation, pull the switch trigger and depress the lock button. Release the switch trigger to stop.
- Use both grips to firmly hold the tool.
- Place the tool base on the workpiece without the bit touching it. Turn the tool on and wait for full speed.
- Lower the body and move forward smoothly, keeping the base flush.
Depth of cut adjustment:
- Loosen the lock lever and lower the body until the bit touches the surface.
- Tighten the lock lever.
- Turn the stopper pole setting nut counterclockwise.
- Lower stopper pole to adjust depth pointer to '0'.
- While pressing fast-feed button, raise stopper pole to desired depth.
Installing/Removing Bit:
- Install bit securely using the provided wrench.
- Use a collet suitable for the bit shank diameter.
- Insert bit fully into collet cone.
- Press shaft lock and tighten collet nut.
Troubleshooting and error codes
| Problem | Possible Cause | Remedy |
|---|---|---|
| The tool does not start. | The tool is not plugged in. | Plug in the tool. |
| The switch trigger is not activated. | Operate the switch trigger. | |
| The tool does not stop immediately after the switch trigger is moved to OFF (Model RP1801F, RP2301FC). | The electric brake is not working. | Have the tool serviced at a Makita service center. |
| Vibration or wobbling when running. | Bit is not installed properly. | Install the bit securely. |