Brand: Makita
Category: Power Tool
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for TW009G
Uploaded: April 20, 2026, 8:03 p.m.
Warranty Information
Refer to the "Makita Authorized or Factory Service Centers" for repairs and maintenance.
Installing/Removing Battery Cartridge: Align the tongue on the battery with the groove in the housing and slide it in until it locks. To remove, slide it out while pressing the button on the front.
Switch Action: Pull the switch trigger to start the tool. Speed increases with trigger pressure. Release to stop.
Reversing Switch Action: Use the reversing switch lever to change direction of rotation (A for clockwise, B for counter-clockwise). Set to neutral position when not in use.
Front Lamp: Turns on when the reversing switch lever is engaged and the trigger is pulled. Turns off after approximately 10 seconds when the trigger is released.
Brightness Adjustment: Press the button to cycle through three brightness levels. The lamp will turn off after the lowest level.
Impact Force Adjustment: Press the button to change impact force in four steps (max, hard, medium, soft).
Application Mode: Press the MODE button to change application modes for controlled bolt driving.