Brand: Miele
Category: Cooktop
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for KM 5773
Uploaded: Nov. 21, 2025, 9:12 p.m.
Manual Publish Date: 2016-01-01
Warranty Information
Warranty information is not explicitly stated in the provided pages.
General Information
- Service and repair work should only be carried out by a suitably qualified electrician.
- Always disconnect the machine from the power supply before starting service work.
- Even when the machine is switched off, voltage may be applied to some components.
- Perform a general visual check and wear protective goggles and gloves when necessary.
Induction Cooktop Safety
- Electromagnetic fields are present when the cooktop is on. Consult your doctor if you have a pacemaker.
- Do not leave metal objects on the burner when checking for correct operation, as they can overheat.
- Keep magnetic data storage media away from the cooktop to prevent data loss.
Touch Current Measurement
- Measurements should be carried out on accessible conductive parts not connected to ground.
- Ensure the ground connection is satisfactory before performing measurements.
Risk of Injury due to Sharp Edges and Protruding Parts
- Wear protective goggles and gloves.
Troubleshooting and error codes
| Fault Code Summary | Page |
|---|---|
| Fault Code F | 29 |
| Fault Code F 1 | 30 |
| Fault Code F 2 | 30 |
| Fault Code F 3 | 30 |
| Fault Code F 4 | 30 |
| Fault Code F 11 | 30 |
| Fault Code F 99 | 31 |
| Fault Code F Flashes Alternating with U | 31 |
| Fault Codes FE 00, FE 04, FE 08, FE 12, FE 16, FE 76 | 31 |
| Fault Codes FE 01 to FE 25 | 31 |
| Fault Code FE 30 Plus Continuous Beep | 32 |
| Fault Code FE 31 | 32 |
| Fault Codes FE 32, FE 33, FE 34 | 32 |
| Fault Code FE 35 | 33 |
| Fault Code FE 36, FE 38, FE 40 | 33 |
| Fault Code FE 39 | 33 |
| Fault Code FE 40 Flashes | 34 |
| Fault Codes FE 41, FE 42 | 34 |
| Fault Codes FE 43, FE 44 | 34 |
| Fault Code FE 45 | 34 |
| Fault Codes FE 51, FE 52, FE 53, FE 54, FE 55 | 34 |
| Fault Code FE 60 | 34 |
| Fault Code FE 80 | 35 |
| Fault Code FE 81 | 35 |
| Fault Code FE 84 | 35 |
| Fault Code FE 85 | 35 |
| Fault Code FE 86 | 36 |
| Fault Code FE 99 | 36 |
| Fault Code FE, plus Changing Number(s) | 37 |
| "A" Flashes, Ring Not Illuminated | 37 |
| Auto-Boost Feature Cannot Be Deactivated | 37 |
| Auto-Boost Feature Cannot Be Activated via Minus - Touchpad | 38 |
| Auto-Boost Feature Activated via Plus + Touchpad | 38 |
| Power Level 6 Shown When Burners are Switched On | 38 |
| Not All Power Level Indicators Light Up at Switch-On | 38 |
| Long Signal Tone at End of Timer Function | 38 |
| Wrong Burner Switches On | 39 |
| Cooktop Does Not Heat | 39 |
| "H" Lights Up in Power Level Display | 39 |
| No Signal Tone When Touchpad is Pressed | 39 |
| No Signal Tone After Time Ends | 39 |
| Spring Clips Missing | 40 |
| Lock LED Flashes | 40 |
| Power Level 1 When Lock Icon Is Touched | 40 |
| Power Level Reduced Automatically When Burner Next to It is Switched On | 40 |
| Fuse Track on Filter/Control Electronic (2N1) Burnt Through | 41 |
| Light Ring Not Illuminated | 41 |
| Light Ring and Power Level are Different | 42 |
| Red Dot Lights Up | 42 |
| Touchpads Do Not React, Fault Code F + Signal Tone | 42 |
| Stop & Go Not Possible | 42 |
| System Lock Cannot Be Deactivated | 43 |
| System Lock Cannot Be Activated | 43 |
| No Appliance Function/Induction Coil Charred | 43 |
| No Appliance Function/Power Electronic Defective | 44 |
| No Appliance Function/Induction Coil Contacts Burnt | 44 |
| Noises from Pots and Pans | 44 |
| Uneven Browning | 45 |
| Heat-Up Takes Too Long | 45 |
| Pot/Pan Not Detected by Cooktop | 45 |
| FE39 & Model Programming | 55 |